Probe-Type Adaption for GPro 500
Easy Installation without Alignment
The probe adaption for the GPro 500 tunable diode laser (TDL) gas analyzer converts analyzer complexity into an easy-to-install probe for accurate, in situ gas analysis.
Measure Gas In Situ
The probe-type adaption makes measuring gas in situ, easy. It can be combined with a wide range of gas measuring analyzers for maximum versatility.
No Sampling or Conditioning System
The probe-type adaption works without a maintenance-prone sampling or conditioning system. This eliminates associated costs and measurement downtime.
No Alignment Necessary
The probe adaption is a self-contained unit that removes the cross-stack alignment challenges of typical TDL analyzers during installation.
|Uppmätt gas||Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia|
|Effektiv banlängd||100, 200, 400mm (3.94", 7.87", 15.75")|
|Undre detektionsgräns||Based on analyzer chosen|
|Kort beskrivning||This process adaption connects to a Gpro 500 gas analyzer for installation at a standard measurement location|
Features and Benefits
|Fast, In-Line Gas Measurement|
The probe-type adaption for the GPro® 500 tunable diode laser gas analyzer enables in situ gas measurement in challenging installations. It can be connected to the full range of METTLER TOLEDO TDL gas parameters for measurement.
|Reduced Lifecycle Maintenance Costs|
A major cost of gas analyzers is their maintenance-prone sampling and conditioning systems. The regular maintenance efforts on these systems increases the total cost of ownership significantly. These systems are fully eliminated with a probe-type analyzer.
|Simplify Installation Planning & Effort|
Typical tunable diode laser analyzers require significant planning and effort for alignment during installation. This need is removed by the probe-type analyzer's self-contained, folded-path structure, dramatically simplifying installation.
|Wide Variety of Applications|
The probe-type adaption is designed for a wide range of gas measurement applications. Available in 100, 200, and 400 mm lengths (3.94", 7.87", 15.75"), the GPro 500 with probe adaption can be inserted into most standard safety and monitoring applications.