Sensor for Hygienic Applications
The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications.
Durable and Hygienic Design
The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination.
Advanced Predictive Diagnostics
This DO sensor has Intelligent Sensor Management (ISM) technology, offering easier calibration and predictive diagnostics thereby reducing maintenance.
หมายเลขกำกับผลิตภัณฑ์: 52206316
พารามิเตอร์การวัดค่า | ออกซิเจน |
เทคโนโลยีการวัดค่า | แอมเพอโรเมตริก/โพลาโรกราฟิก |
ความแม่นยำ | ≤ ± [1 % +0.1 ppb] |
เวลาตอบสนอง | T98 = < 90 s @ 25°C (77°F)(อากาศที่ N2) |
ระดับการปกป้อง IP | IP68 |
สื่อ/การใช้งานหลัก | อาหารและเครื่องดื่ม |
ISM (ดิจิตอล) หรืออะนาล็อก | ISM (ดิจิตอล) |
วัสดุโลหะส่วนเปียก | สเตนเลสสตีล 316L |
ส่วนเชื่อมต่อระบบ | Pg 13.5 |
ความยาวเซ็นเซอร์ | 70 mm |
วัสดุเมมเบรนส่วนเปียก | PTFE |
ดีไซน์ขั้วต่อ | ตรง |
รุ่น | InPro 6900/6900i/6950i |
นึ่งฆ่าเชื้อได้/ฆ่าเชื้อได้ | ใช่ |
ช่วงอุณหภูมิ เชิงกล | -5 °C – 121 °C |
แรงดันการใช้งาน (Bar) | 0.2–6 บาร์ |
การออกแบบแรงดันที่รองรับได้ | 12 bar |
ขั้วต่อสายเคเบิล | K8S (IP68) |
ผ่านใบรับรองด้านสุขลักษณะ/ความเข้ากันได้กับเนื้อเยื่อในร่างกาย | FDA/USP คลาส 6 |
ผ่านใบรับรองสำหรับการใช้งานในพื้นที่อันตราย | ATEX/IECEx: Ex ia IIC T6/T5/T4/T3 Ga/Gb Ex ia IIIC T69°C/T81°C/T109°C/T161°C Da/Db FM: IS / I, II, III / 1 / ABCDEFG/ T6 Ta=60 °C - 53 800 002 Entity |
สัญญาณเซ็นเซอร์ในอากาศที่ 25 °C (77 °F) | 250 ถึง 500 nA |
ช่วงการวัดค่า | ความอิ่มตัว O2 0-100% |
ช่วงการใช้งาน | 1 ppb - ความอิ่มตัวของออกซิเจน |
ฆ่าเชื้อได้/นึ่งฆ่าเชื้อได้ | ใช่ |
สัญญาณตกค้างในตัวกลางที่ปราศจากออกซิเจน | <0.025% of signal in ambient air |
ความต้านทานแรงดันที่วัดได้ | 0.2 bar – 9 bar |
ช่วงอุณหภูมิที่ทำการวัด | 0 °C – 80 °C |
ขีดจำกัดการตรวจวัด | 1 ppb |
Easy to Integrate
The InPro 6900i DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.
Long Membrane Life
Ingold's PTFE/silicone membranes have been designed with an internal steel mesh that makes the membrane more rugged and dramatically increases membrane life.
Modular Design Saves Time and Money
Replacement of the anode/cathode assembly has been made simple with state-of-the-art interior sensor design, thereby reducing maintenance costs. No complicated service procedures: the quick-disconnect interior body can be replaced in less than 5 minutes.