Sensor for Hygienic Applications
The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications.
Durable and Hygienic Design
The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination.
Easy to Integrate
The InPro 6900 DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.
หมายเลขกำกับผลิตภัณฑ์: 52200944
พารามิเตอร์การวัดค่า | ออกซิเจน |
เทคโนโลยีการวัดค่า | แอมเพอโรเมตริก/โพลาโรกราฟิก |
ความแม่นยำ | ≤ ± [1 % + 3 ppb] |
เวลาตอบสนอง | T98 = < 90 s @ 25°C (77°F)(อากาศที่ N2) |
ระดับการปกป้อง IP | IP68 |
สื่อ/การใช้งานหลัก | อาหารและเครื่องดื่ม |
ISM (ดิจิตอล) หรืออะนาล็อก | อะนาล็อก |
วัสดุโลหะส่วนเปียก | สเตนเลสสตีล 316L |
ความขรุขระของพื้นผิววัสดุส่วนเปียก | N5/Ra16 (Ra=0.4μm/16μin) |
เส้นผ่านศูนย์กลางเซ็นเซอร์ | 12mm |
วัสดุโอริง | ซิลิโคน |
ส่วนเชื่อมต่อระบบ | Pg 13.5 |
ความยาวเซ็นเซอร์ | 70 mm |
วัสดุเมมเบรนส่วนเปียก | PTFE |
ดีไซน์ขั้วต่อ | ตรง |
รุ่น | InPro 6900/6900i/6950i |
นึ่งฆ่าเชื้อได้/ฆ่าเชื้อได้ | ใช่ |
ความต้านทาน CIP | ใช่ |
ช่วงอุณหภูมิ เชิงกล | -5 °C – 121 °C |
แรงดันการใช้งาน (Bar) | 0.2–6 บาร์ |
การออกแบบแรงดันที่รองรับได้ | 12 bar |
การรวมสัญญาณอะนาล็อก | สัญญาณ nA |
ขั้วต่อสายเคเบิล | VP6 (IP68) |
ผ่านใบรับรองด้านสุขลักษณะ/ความเข้ากันได้กับเนื้อเยื่อในร่างกาย | EHEDG/FDA/USP คลาส 6 |
ผ่านใบรับรองสำหรับการใช้งานในพื้นที่อันตราย | ATEX/IECEx: Ex ia IIC T6/T5/T4/T3 Ga/Gb Ex ia IIIC T69°C/T81°C/T109°C/T161°C Da/Db FM: IS / I, II, III / 1 / ABCDEFG/ T6 Ta=60 °C - 53 800 002 Entity |
ใบรับรองและการอนุมัติ | ใบรับรองคุณภาพ, ใบรับรองวัสดุ 3.1, ใบรับรองพื้นผิวหน้าสัมผัส, ใบรับรอง ATEX/IECEx, FDA/USP คลาส IV, EHEDG |
สัญญาณเซ็นเซอร์ในอากาศที่ 25 °C (77 °F) | 250 ถึง 500 nA |
ช่วงการวัดค่า | ความอิ่มตัว O2 0-100% |
ช่วงการใช้งาน | 1 ppb - ความอิ่มตัวของออกซิเจน |
ฆ่าเชื้อได้/นึ่งฆ่าเชื้อได้ | ใช่ |
สัญญาณตกค้างในตัวกลางที่ปราศจากออกซิเจน | <0.03% of signal in ambient air |
ความต้านทานแรงดันที่วัดได้ | 0.2 bar – 9 bar |
ช่วงอุณหภูมิที่ทำการวัด | 0 °C – 80 °C |
ขีดจำกัดการตรวจวัด | 1 ppb |
การเชื่อมต่อ | VP (IP68) |
Long Membrane Life
Ingold's PTFE/silicone membranes have been designed with an internal steel mesh that makes the membrane more rugged and dramatically increases membrane life.
Modular Design Saves Time and Money
Replacement of the anode/cathode assembly has been made simple with state-of-the-art interior sensor design, thereby reducing maintenance costs. No complicated service procedures: the quick-disconnect interior body can be replaced in less than 5 minutes.
High Process Safety
The FDA-compliant materials of construction and the easy-to-clean hygienically polished N5 grade surface finish satisfy regulatory requirements.