Extractive Cell Adaption for GPro 500
Retrofit Paramagnetic and NDIR with TDL
Tunable diode laser gas analyzers offer accuracy, convenience, and reliabiilty. The extractive cell adaption for the GPro 500 TDL is the optimal way to replace maintenance-prone paramagnetic and NDIR extractive systems.
Directly Replace Outdated Analyzers
The GPro 500 with leading-edge tunable diode laser technology can easily replace aging paramagnetic or NDIR analyzers.
Works with Existing Sampling System
The GPro 500 with extractive cell can be installed directly after an existing sampling and conditioning system for a quick, inexpensive retrofit.
No Alignment Necessary
Unlike most traditional cross-pipe TDL analyzers, the extractive GPro 500 does not need alignment, significantly reducing the risk of downtime.
|Efektywna długość ścieżki Efektywna długość ścieżki:200 mm, 400 mm, 800 mm, 1 m, 8 m (7.87", 15.75", 31.50", 39.37", 315")||200 mm, 400 mm, 800 mm, 1 m, 8 m (7.87", 15.75", 31.50", 39.37", 315")|
|Mierzony gaz Mierzony gaz:Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia||Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia|
|Dolna granica wykrywalności Dolna granica wykrywalności:Based on analyzer chosen||Based on analyzer chosen|
|Dane techniczne Dane techniczne:This process adaption connects to a GPro 500 gas analyzer where conditioning and sampling are required.||This process adaption connects to a GPro 500 gas analyzer where conditioning and sampling are required.|
|TDL Technology in an Extractive Cell|
Tunable diode laser technology offers a reliable, drift-free, and accurate method for measuring gas concentrations in a gas stream. While typically used in situ, some applications require sampling and conditioning. The extractive GPro 500 fits these processes.
|For Challenging Process Conditions|
Contrary to paramagnetic extractive systems, the extractive GPro 500 can measure accurately even at very high flow speeds. It measures precisely up to 250 °C (482 °F) and at pressures that exceed standard controlled ambient pressure.
|No Interference from Background Gases|
The GPro 500 gas analyzer ensures you have an accurate measurement, even when background gases are present. Advanced signal processing technology in the GPro 500 gives you truly reliable measurements, without the risk of interference.
|Non-Contacting for Corrosive Gas Streams|
Gas measurement systems often have challenges with corrosive gases, as they can destroy the analyzer. The GPro 500 with extractive cell adaption uses a non-contacting measurement technology, so it can be used in conditions where corrosive gases are present.