Tiếng Việt
White Paper

Ammonium Nitrate pH Measurement

White Paper

Application Note: Longer Sensor Lifetime in High-Temperature, High-Concentration Media

Ammonium Nitrate pH Measurement
Ammonium Nitrate pH Measurement

During storage, ammonium nitrate pH control plays an important role in the prevention of decomposition and ammonia loss. However, due to the high temperature, high pressure, and high concentration, ammonium nitrate pH measurement during storage can quickly cause a pH sensor to expire. This application note addresses the importance of pH measurement in ammonium nitrate storage, discusses the challenges, and proposes a solution to reduce sensor loss during ammonium nitrate pH control.
 

Gọi để được báo giá

Ammonium nitrate is an aqueous solution that can be further processed into a dried or granulated product. It can be used as a pure fertilizer on its own, or can be blended with other products. It also has applications as an explosive. For safety reasons it is often stored as a liquid instead of a solid crystal.

Ammonium nitrate pH measurement is an important part of the process of maintaining the compound in its liquid state. Ammonium nitrate pH levels need to stay neutral or alkaline to prevent the acidic conditions that enhance decomposition. But ammonium nitrate must also be stored at very high temperatures to prevent crystallization. At high concentrations, temperatures regularly need to be above 120°C to stop the liquid ammonium nitrate from crystalizing in the storage vessel.

The problem is that the high storage temperature causes many standard pH sensors to have a very short lifespan. Sensor lifetimes of less than one week in this environment are common.

There are solutions for dealing with this by sampling, but these require dilution of the ammonium nitrate, reducing the temperature, measuring, and then reconcentrating the sample. This not only requires expensive equipment, but also significant energy expenditure.

This application note addresses these topics, and proposes the refillable InPro 2000i pH sensor as a way to prevent sensor failure or implementation of costly concentration systems for the measurement of ammonium nitrate pH during storage.