Single-use pH Sensors
Ensure Reliable Measurement of pH in Bioprocesses
Single-use pH sensors are designed to be securely installed into single-use bioreactors and other devices. METTLER TOLEDO single-use pH sensors are factory calibrated and gamma sterilizable sensors for integration into single-use processes for biopharmaceutical manufacturing. These single-use pH sensors are designed to ensure a significantly longer shelf life for up- and downstream devices, while offering an output signal identical to that of a reusable sensor for efficient process integration.
Factory Calibration for Reliable pH Measurements
These single-use pH sensors are factory calibrated by METTLER TOLEDO to ensure that they are accurate and ready to measure in single-use bioprocess devices.
Longer Sensor Shelf-Life Enhances Inventory Control
With a shelf-life of 30 months, these single-use pH sensors enable enhanced equipment inventory control at the process device manufacturer and at end-user sites.
Robust Sensor Design for Protection During Bag Delivery
To ensure bag protection during transport and preparation, these single-use pH sensors have round-edged protective guards to prevent damage to the electrode inside of the bag.
Suitable for a Wide Range of Applications
These single-use pH probes can be used throughout a broad range of applications, including cell culture, harvesting, fermentation, media/buffer preparation, virus inactivation and purification steps.
Certified Materials for Established Process Safety
All wetted polymer materials used on single-use pH sensors are made of USP 88 VI certified materials to ensure the highest process safety to meet biocompatibility requirements.
Unique Design Ideal for Welding to Bag Stock
Single-use pH sensors from METTLER TOLEDO offer a unified design that allows safe and easy installation in a standard 1" Eldon James port disc, making them ideal for welding to bag stock.
Easy Integration with Dependable Output Signal
The output signal of these single-use pH probes is identical to that of METTLER TOLEDO reusable pH probes, to allow easy integration into existing transmitters and process environments.
Single-use pH sensors are sensors for pH measurement that are designed to be integrated into single-use process devices by the device manufacturer. Single-use pH sensors from METTLER TOLEDO measure pH with a potentiometric single-use sensor which has been factory calibrated by METTLER TOLEDO in common buffer solutions (zero point and slope). These disposable pH sensors can be used in a broad range of applications that require single-use bags including cell culture, harvesting, fermentation, media/buffer preparation, virus inactivation and purification steps. With their robust design for enhanced protection, METTLER TOLEDO single-use pH probes ensure a significantly longer shelf life while offering an output signal identical to that of a reusable sensor for highly efficient integration. All wetted polymer materials are made of USP 88 VI certified materials.
The shelf life of a METTLER TOLEDO single-use pH sensor is up to 30 months. This long shelf life makes inventory management easier for both process device manufacturers and end users.
Single-use pH sensors are directly integrated into the single-use process device by the device supplier and cannot be taken out and replaced. The complete SUB assembly with the single-use pH sensor is gamma irradiated and is shipped pre-sterilized to the biopharmaceutical producer. Consequently, integrated single-use pH sensors will never be removed from the reactor, will never be autoclaved, and will never be calibrated outside the single-use bioreactor with buffer solutions.
The InSUS 310 by METTLER TOLEDO is a single-use pH sensor designed for integration into single-use bioprocess devices. This single-use pH probe has been factory calibrated by the sensor manufacturer in common buffer solutions (zero point and slope) to provide the most reliable pH measurements. The shelf life is 30 months dry storage and the disposable pH sensor is made of USP 88 VI certified materials to ensure the highest process safety.
METTLER TOLEDO sells single-use sensors directly to bioprocess equipment manufacturers for integration into their single-use devices. These sensors are not directly sold to end users. If you are interested in single-use pH sensors or single-use dissolved oxygen sensors for your manufacturing operation, contact your bioprocess device manufacturer and ask them for METTLER TOLEDO InSUS single-use sensors.