Need assistance?
Our team is here to achieve your goals! Speak with our experts.

Crucible 30 uL, Alox, 20 pcs

Alumina 30 μL crucibles with lid.Aluminum oxide crucibles

The smallest TGA crucible up to 1600 °C

Recommended for TGA or TGA/DSC measurements up to 1600 °C. In some cases good alternative for DSC measurements up to 640 °C.

Excellent Thermal Conductivity

The perfectly flat base and low mass make these crucibles good candidates for TGA/DSC measurements at temperatures above 600 °C.

Alumina crucibles can be reused

After the measurement, the alumina (Al2O3) crucibles can be regenerated. Often they are mechanically cleaned, then rinsed in solution before drying.

Material No.: 51140843

Call for Quote
Specifications - Crucible 30 uL, Alox, 20 pcs
Material
Alumina
Volume
30 µL
Measuring Technique
TGA
Automation
Yes
Maximum Temperature
2,000 °C
Maximum Pressure
0.0 MPa
Number of Pieces
20
Included
with Lids
Pin
without
Beaker Volume
30 µL
Lid
with

No sample change prior to measurement

The alumina crucibles can be used in combination with special Al lids. They prevent sample changes during the waiting period before the measurement. This is of high relevance for samples that can take up water or samples that evaporate content.

Regeneration of alumina crucibles

After mechanical cleaning store, if needed, in water (or even in 10% hydrochloric acid). Oxides may form which can then be removed by rinsing. After drying, heat the crucibles to red hot to ensure that no weight loss occurs when they are used.

Several metals are critical

Al2O3 has the tendency to form spinels with Fe2+, Ni2+, Cu2+ and others, particularly at temperatures above 1000 °C. In addition, the melt of these metals dissolve Al2O3.

Documentation

Product Brochures

Brochure: Crucibles for Thermal Analysis
Crucibles serve as containers for samples during DSC and TGA measurements. They guarantee that the sensor is not contaminated during the measurement.

Accessories

Alumina Crucibles for Thermal Analysis

Set of 40 special aluminum lids for alumina crucibles and sapphire crucible. They are removed by the sample changer during the TG measurement.

Material No.: 51119649

Consumables

Software

Get Your Quote
Crucible 30 uL, Alox, 20 pcs