EasyMax HFCal Upgrade Kit
Upgrade your EasyMax to a Heat Flow Calorimeter
Would you like to obtain more information from a single experiment?
Convert your EasyMax 102 or 402 Reactor System into a into a fully functional reaction calorimeter and obtain thermodynamic information including:
- Heat Transfer Coefficient
- Specific Heat of Reaction Mass
- Reaction Enthalpy
- Heat of Reaction under both isothermal and non-isothermal conditions
- Thermal Conversion
- Adiabatic Temperature Rise
The EasyMax HFCal Upgrade Kit is plug and play, and includes all items needed to convert an EasyMax into a heat flow calorimeter.
Note: iControl software is not included in the upgrade kit.
Spesifikasjoner - EasyMax HFCal Upgrade Kit
| Material nummer | 30090576 |
| Specifications | EasyMax 102 HFCal | EasyMax 402 HFCal |
|---|---|
| Calorimetry Type | Heat Flow Calorimetry |
| Calibration Heater | 10 W |
| Precision Heat Transfer | <± 4% |
| Accuracy Heat Flow | typically ± 3% to 5%, 0.1 W under isothermal conditions, at average heat generation > 5W typically ± 5% to 10% under non-isothermal conditions at average heat generation rate > 5W |
| Sensitivity Heat Flow | ≤ 0.2 W equivalent to 2 W/L | ≤ 0.25 W equivalent to 0.6 W/L |
| Control and Data Logging | iControl PC Software |
| Software | iControl 5.4 or higher required HFCal license iC Data Center (optional) |
| Power and Data Interface | Direct connect to standard CAN interface of EasyMax No additional power supply or PC connection required |
| Dimensions | 120 mm x 40 mm x 170 mm |