O2 Sensor InPro6900iG/12/220
Iltmåling på stedet.
Nøjagtig ved lave iltniveauer
Sensor til hurtig og nøjagtig bestemmelse af iltniveauer helt ned til 0,005 % O2-indhold.
Længere procesdriftstid
Modulopbygningen giver mulighed for nem og hurtig membranudskiftning. Kan kalibreres med luft ved målepunktet
Processikkerhed vha. ISM
ISM-teknologi med nem installation (Plug & Measure) og forbedret diagnostik til planlægning af vedligeholdelse.
Materiale nr.: 52206438
Specifikationer
Specifikationer - O2 Sensor InPro6900iG/12/220
| Måleparameter | Gasfase-ilt |
| Måleteknologi | Amperometrisk Clark-elektrode |
| Måleområde | 50 ppm - 60 V-% O2 |
| Nøjagtighed | ≤ ± [1 % +50 ppm] |
| Reaktionstid | T90 ≤ 20 s (kvælstof til 15 Vol-% O2 ved 25 °C / 77 °F) |
| Primært medie/anvendelse | Kemiske processer Farmaceutisk/biovidenskabelig produktion |
| ISM (digital) eller analog | ISM (digital) |
| Kabeltilslutning | K8S |
| Sensorlængde | 220 mm |
| Procesforbindelse | Pg 13.5 |
| Tilslutningsform | Lige |
| O-ring-materiale | Silikone |
| Sensordiameter | 12 mm |
| Overfladeruhed på befugtede dele | N5/Ra 16 (Ra=0,4 mm/16 min) |
| Fugtede materialer | |
| Fugtet membranmateriale | PTFE |
| Modelfamilie | InPro6900iG |
| Detekteringsgrænse | 50 ppm |
| Detekteringsgrænse | 50 ppm |
| Sensorsignal i luft ved 25 °C (77 °F) | 250...500 nA |
| Restsignal i iltfrie medier | <0,03 % af signalet i omgivelsesluft |
| Temperaturkompensation | Automatisk |
| Måletemp.område | 0 °C – 70 °C |
| Driftstryk (bar) | 0,200 bar–9,000 bar |
| Mekanisk temperatur, område | -5 °C – 121 °C |
| Designtryk (bar) | maks. 12 bar |
| Designtryk (PSI) | maks. 174 psi absolut |
| Godkendelser til farlige områder | ATEX: Ex ia IIC T6 / T5 / T4 / T3 Ga / Gb, Ex ia IIIC T69 °C / T81 °C / T109 °C / T161 °C Da / Db. FM: IS Cl. I, II, III, Div 1, GR ABCDEFG / T6 * |
| Hygiejne-/biokompatibilitetsmæssige godkendelser | EHEDG, FDA/USP klasse VI |
| Andre certifikater | METTLER TOLEDO kvalitetscertifikat, materialecertifikat 3.1, N5/Ra 16 |
| -5 °C – 121 °C | |
| Provozní rozsah | 50 ppm - 60 V-% O2 |
| Tilslutning | K8S ISM |
| Målt modstand mod tryk | 0,2 bar – 9 bar |
| 23 °F – 250 °F |
KALREZ is a registered trademark of E. I. Du Pont de Nemours and Company Corporation
Features and Benefits
| Accurate at Low Oxygen Concentrations The InPro 6900iG/12/220 offers reliable measurement between 0.1% and 60% oxygen, at an accuracy of 50 ppm. This makes it suitable for applications that need measurement at a low ppm level and require high operational availability. |
| Suited to Your Process Needs To meet the requirements of your specific application, the InPro 6900iG/12/220 is 220 mm long for medium to long length installations. It uses a standard silicone O-ring with 316L stainless steel wetted parts. |
| Fast Sensor Replacement for More Uptime The InPro 6900iG/12/220 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process. |
| Plan Maintenance with ISM Diagnostics ISM technology in the InPro 6900iG/12/220 monitors sensor stress to provide a prediction for upcoming calibration needs. It also tracks electrolyte level to identify evaporation and leakage, and informs you when refilling is required. |
Dokumentation
Tilbehør
Sensorkalibrering og vedligeholdelsesværktøj
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Materiale nr.: 52300383
