SmartCheck SLS1010S - Overview - METTLER TOLEDO

SmartCheck SLS1010S

Fast & Easy Pipette Verification.Between calibrations, SmartCheck provides a fast way to verify that a pipette is dispensing accurately. It automatically detects the test volume, prompts a repeat three more times and calculates the measured uncertainty, resulting in a pass/fail.

Verify any Brand of Pipette

Use SmartCheck to verify the performance of any brand of pipette that dispenses 10 –1,000 μL. Also verify individual channels of multichannel pipettes.

Small Footprint

SmartCheck fits easily on any bench. The compact size enables a pipette to be tested to ensure it performs within tolerance limits before starting an experiment.

Avoid Rework

Verifying a pipette before working saves precious reagents and time. You know if a pipette is aspirating and dispensing correctly within 60 seconds

Material No.: 30564095

Call for Quote
Specifications - SmartCheck SLS1010S
Product Type
Pipette Verification Device
Repeatability typical (sd)
0.08 μL @ 100 μL
Vessel Capacity
10 mL
Measurement Principle
Gravimetric, 4 volumetric measures
Pipette Test Volume
10 µL
20 µL
50 µL
100 µL
200 µL
300 µL
1,000 µL
Pipette Test Tolerance
Default ± 5%, adjustable 3 -10%
Repeatability Limit (sd)
0.15 μL @ 1'000 μL

Reduce Risk

In regulated environments, discovering a pipette is out of tolerance can lead to a time-consuming and expensive investigation. SmartCheck provides reassurance that the pipette you are using is performing as expected.

Trust Your Pipette

Between calibrations, SmartCheck provides a fast, practical way to verify that a pipette is dispensing accurately. Simply dispense distilled water into the opening and the test volume will be automatically detected. Repeat this three times to obtain a pass/fail result

Accessories

SmartCheck

Check the performance of the SmartCheck in the place where it is installed and used by performing a repeatability test with a 1 g weight, special weighing pan, tweezers, and draft shield. The results can be stored and documented in the PipetteX Software.

Material No.: 30448961

The EasyScan RFID allows the use of RFID tags for quick pipette identification and documentation of pipette check results in the PipetteX software at all times.

Material No.: 30448967

Consumables

Software

Get Your Quote
SmartCheck SLS1010S