Analyzer 2300Na Panel Assy

Name: Analyzer 2300Na Panel Assy
Brand: Mettler Toledo

The 2300Na Sodium Analyzer provides early detection of trace sodium contamination in a water system with minimal operator intervention. It is an ideal solution for in-line sodium monitoring in ultrapure water or steam cycle chemistry.

Material No.: 30768009

Accurate, Reliable Sodium Monitoring

Combination reference and pH electrode confirms reagent addition for reliable operation, minimizes reagent consumption, and reduces maintenance.

Configurable, Automated Calibration

Unattended, automated calibration ensures the accurate measurement of sodium in your water system and detects breakthroughs right when they occur.

Open Panel Design Reduces Costs

The open panel design reduces costs in areas where additional protection is not required, allowing customers to easily meet budget constraints.

Sub-PPB Sodium Monitoring at a Glance

The 2300Na Sodium Analyzer delivers more than monitoring at sub-ppb sodium concentration levels. The simultaneous display of temperature, adjusted pH and calibration progress provide a complete picture to increase uptime and reduce operating costs.

Greater Accuracy (Unattended)

The 2300Na Sodium Analyzer eliminates the need for operator intervention with pre-configured, periodic self-calibration. Providing greater measurement accuracy, an internal pH measurement ensures interference-free sodium determination.

Full Lifecycle Value

The 2300Na analyzer delivers measurement accuracy and reliability to exceed your expectations, not your budget. With long, 6-month maintenance intervals you can ensure analyzer uptime with less frequent etching, calibration and lower reagent consumption.

Low Maintenance Made Easy

With 6-month preventive maintenance intervals, the 2300Na Sodium Analyzer requires less downtime and reduces the overall critical operator time commitment. Every calibration automatically results in sensor conditioning, further reducing maintenance requirements.

Specifications - Analyzer 2300Na Panel Assy

Sodium Measurement Range	0.001 - 100,000 ppb or equivalent ppm, autoranging
Sodium Measurement Accuracy	±10% of reading or ± 0.05 ppb whichever is greater
Response Time	90% at 5 minutes
Sample pH	2.5-12
Update Rate	Once per second
Reagent Consumption	Diisopropylamine (DIPA), approximately 1 L per 3 months more at higher temperatures and for cation exchange samples
Sample Flow rate	>40 mL/min (>20 mL/min for cation exchange samples), excess to drain
Sample Temperature	5-50°C (41-122°F)
Sample Pressure	0.3-7 bar (5-100 psig)
Grab Sample Measurement	Included
Power Supply	100-240 VAC, 50-60 Hz, 25 W, on power loss all settings are retained without batteries
Ambient Operating Temperature	10-45°C (50-113°F)
Humidity	10-90% non-condensing
Process Connection	Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included Sample Inlet: 1/4" or 6 mm OD tube SS compressin fitting Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included
Operator Interface	4-line backlit LCD, 5 tactile keys simultaneous display of sodium, conditioned pH, auto-cal status (temperature optional)
Analog Output	22mA alarm, 500 ohm max load, not for use with externally powered circuit For sodium, conditioned pH, temperature four powered 0/4-20 mA,
Analog Output Scaling	Linear, bi-linear, logarithmic (1,2,3,4 decades), auto ranging
Measurement Parameter	Sodium
Electrode Conditioning	Part of auto-cal sequence
Relay Contacts	3A resistive freely assignable to setpoints for sodium, pH, temperature other relays used for auto-cal
Sodium Calibration	Automatic, unattended 3-point known addition
Calibration	Automatic
Analog Output Accuracy	±0.05 mA
Model Family	2300Na
EnclosureType	Panel
Built-in sequencer	No

Datasheets

2300Na Sodium Analyzer

The 2300Na Sodium Analyzer delivers more than monitoring at sub-ppb sodium concentration levels. The simultaneous display of temperature, adjusted pH...

Get Your Quote

Analyzer 2300Na Panel Assy

I want to…

Search suggestions