InTrac 777e Retractable Housing

InTrac 777e Retractable Housing

Simplifies Sensor Maintenance The InTrac 777e retractable housing is designed for industrial processes that use 12mm gel-filled electrodes for the measurement of pH/ORP, DO, CO2 & conductivity. With a built-in flushing chamber, the electrode can be cleaned without interruption

Easy Access to In-Line Sensors

The InTrac 777e offers manual or pneumatic sensor withdrawal for easy maintenance or replacement of pH, DO, CO2 or conductivity sensors.

Highly Efficient Flushing Chamber

To ensure particles/dirt are flushed away, the InTrac 777e has a single flushing chamber to clean and calibrate the electrode with no interruptions.

Prevents Process Leaks

The safety system prevents any release of process media from the housing. Without a sensor in place, the housing cannot be inserted into the process.

Specifications - InTrac 777e Retractable Housing
Operation Retractable (Manual); Retractable (Pneumatic)
Sensors Accepted pH & ORP (12mm); Dissolved oxygen; CO2; Conductivity
Wetted Parts 316 L Stainless Steel, Hastelloy – C22, titanium, PP, PVDF, PEEK
O-Ring Viton®-FDA, EPDM-FDA, Kalrez®-FDA-USP Class VI
Sensor Fitting Sensors with Pg 13.5
Temperature Range (Celsius) Polypropylene: 0 to 70 °C , Stainless steel: – 10 to 70 °C
Temperature Range (Farenheit) Polypropylene: 32 to 158 °F, Stainless steel: 14 to 158 °F
Pressure Rating (bar) Manual: 0 to 5 bar Pneumatic: 0 to 16 bar
Pressure Rating (psig) Manual: 0 to 73 psig Pneumatic: 0 to 232 psig
Insertion Lengths 70 mm, 100 mm, 200 mm, 295 mm
Model Family InTrac 77X
Maximum Permissable Pressure (bar) Polypropylene (PP): 6 bar / 20 °C PVDF/PEEK: 6 bar / 20 °C 316 L stainless steel: 16 bar / 140 °C Hastelloy/Ti: 16 bar / 140 °C
Maximum Permissable Pressure (psig) Polypropylene (PP): 87 psig / 68 °F PVDF/PEEK: 87 psig / 68 °F 316 L stainless steel: 232 psig / 276 °F Hastelloy/Ti: 232 psig / 276 °F
Housing Length 70/100 mm: 360 mm (14.2") in process 515 mm (20.3") retracted from process 200 mm: 460 mm (18.1") in process 915 mm (36") retracted from process
Position Monitoring Options Pneumatic check (3⁄2 way valve), G 1⁄8" Inductive check, non-Ex, M12 X 1 Inductive check, Ex, M12 X 1
Pneutmatic Connections 4 to 8 bar (58 to 116 psig)
Flushing Connections 2 to 6 bar (29 to 87 psig)
KALREZ and VITON are registered trademarks of E. I. Du Pont de Nemours and Company Corporation

Ensure Process Safety & Reliability

For enhanced process safety, the InTrac 777e includes a Tri-Lock™ system to improve process reliability in harsh environments. The steel version is designed for safe operation in Ex-classified zones according to guideline ATEX 94/9/EC.

Reduce Overall Process Costs

The InTrac family of retractable housings helps to substantially reduce the operating costs of a measuring point, by allowing well-planned automatic cleaning and calibration of a sensor, which will increase its average operational life significantly.

Materials to Meet Your Environment

Multiple process connections and materials make the InTrac 777e a great choice by offering 316 L stainless steel, Hastelloy – C22, titanium, PP, PVDF, and PEEK versions for applications in chemical, biopharmaceutical or food and beverage industries.



Housings selection
This guide provides an overview of retractable housings and the steps you should take in selecting the right housing for specific processes and indust...


Data Sheet: InTrac 77X e Housing
The InTrac® 776 e / 777 e / 779 e series are designed as process connections for applications with highly demanding conditions. They feature the Tri-L...


Minimal Corrosion: Thanks to pH Control
The installation of an intelligent in-line pH measurement with automated electrode cleaning allows for accurate control of sour water pH in Crude Unit...
Application Note: Optimized Control of Sour Water in Petrochemical Applications
Application Note - Control of sour water without damaging the pH electrode
Application Note: Improve Your Pulp & Paper Process Further with ISM Technology
Many years of experience in the field of industrial measurement systems form the basis of METTLER TOLEDO’s competence. Now with its ground-breaking IS...
pH Measurement in Amine-Based Quench Water
To control the separation and to minimize corrosion, it is important to maintain the right pH level. Therefore neutralizing agents are injected in the...
In-line O2 Measurement for Inertization Control
For safety reasons, some chemical reactions take place in an inert gas environment where the amount of oxygen present is tightly controlled. The METTL...
Protection From Gas Explosion
One of the top-ten DMT producers was faced with periodic deficiencies of their oxygen measurement system for centrifuge inertization processes. The us...
Enhanced Process Safety During Centrifuge Inertization
A leading global supplier of generic pharmaceuticals was able to enhance process safety and operational efficiency during centrifugation by using a ME...

Related Products and Solutions

Cleaning System EasyClean 400-NCC2
The EasyClean 400 is used for fully automatic cleaning and calibration of pH measuring points. It provides a flexible system solution, which can be im...
Cleaning System EasyClean 200e
The unique automatic sensor cleaning system for METTLER TOLEDO InTrac retractable housings
Cleaning System EasyClean 150
EasyClean150 is designed for the automated flushing of sensors installed in a pneumatically operated retractable housing. The system controls the move...
Transmitter M300 Process 2-CH ¼DIN
This two-channel, 1/4 DIN size M300 transmitter is designed for standard process applications. It has a touchscreen interface and integrates with pH,...


Get Your Quote
InTrac 777e Retractable Housing
USP Class VI
This page is not optimized for your web browser. Consider using a different browser or upgrade your browser to the latest version to ensure the best experience.