We support and service your instruments through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
Conductivity sensor housings are process connection hardware that enables a conductivity sensor to be installed into a process, ensuring optimal measurement results. METTLER TOLEDO conductivity sensor housings are available in a wide range of designs for strength, safety, cleanliness and optimized performance in common process environments. To best suit your application needs, conductivity sensor housings range from simple immersion fittings to automated retractable systems.
The conductivity sensor housings are designed to ensure the sensor reaches the desired depth for obtaining optimal measurement results in your application.
METTLER TOLEDO offers stationary, retractable, flow-through and immersion sensor housings, each with specific features for strength, safety, cleanliness and optimized performance.
A conductivity sensor housing can be applied to open basins, pipes, closed tanks, chemical reactors, and a wide range of vessels accommodating common process environments.
With a retractable conductivity sensor housing, you can simplify maintenance efforts by integrating the housing with an automated cleaning system.
A wide range of conductivity sensor housing material options are available, including stainless steel, titanium, PVDF and PVC to best suit your operating environment and your process.
METTLER TOLEDO offers conductivity sensor housings with different connection styles, bore sizes, insertion lengths and process seal materials to ensure your process needs are satisfied.
A conductivity sensor housing is a piece of hardware that allows a process conductivity sensor to be connected in-line to an industrial process for continuous process control measurements. It allows a sensor to reach the desired depth in an open basin, pipe, closed tank, or vessel for accurate conductivity measurement.
A conductivity sensor housing enables an analytical sensor to be installed in-line into a process to ensure the sensor is protected and reaches the desired depths for obtaining optimum analysis results. The conductivity sensor housing that you choose depends on your process conditions and business requirements. Depending on the application, each connection type can have specific requirements for strength, safety, cleanliness, optimized performance, corrosion resistance, insertion depth or physical space. Process connection hardware ranges from simple drop-in immersion fittings to complex automated systems capable of cleaning your measuring equipment. METTLER TOLEDO can help you select the best hardware for your application.
METTLER TOLEDO has four different conductivity sensor housing types. Stationary conductivity housings are installed statically in a vessel. They are used in sterile conditions and are in the InFit housing range. Retractable conductivity sensor housings allow easy insertion/withdrawal of the measuring sensor without interrupting the ongoing process. They are used in processes which tend to cause sensor contamination or which run over long periods of time, and are in the InTrac housing range. Flow-through housings are designed for measuring points in pipes, as they allow continuous monitoring and direct insertion of the probe into the sample media. These housings are in the InFlow range. Finally, immersion housings are used in open vessels/channels and are in the InDip housing range. Their design allows sensor mounting and immersion into the media.
METTLER TOLEDO conductivity sensor housings directly integrate with a wide range of METTLER TOLEDO conductivity sensors including: