We support and service your measurement equipment through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
Dissolved Ozone Sensor | pureO3
Reliable Dissolved Ozone Monitoring in Pure Water Systems
A dissolved ozone sensor is an analytical instrument designed for constant monitoring of ozone in pure water applications. Intelligent Sensor Management (ISM) technology provided on the pureO3 dissolved ozone sensor uses predictive diagnostics to simplify sensor handling and improve process control. This dissolved ozone probe combines advanced design features with a robust measurement technology to ensure accurate and reliable ozone measurement down to zero ppb.
Clear Monitoring of the Sanitization Process
With monitoring down to 0 ppb of O3, the dissolved ozone probe provides a clear indication of when all ozone has been removed during a sanitization process to ensure water is ready for use.
Dissolved Ozone Sensor Designed for Accurate Measurement
The METTLER TOLEDO dissolved ozone probe's innovative membrane, cathode and electrolyte combination provides fast, reliable ozone measurement for pure water applications.
Fast Start-up and Commissioning
The pureO3 dissolved ozone sensor offers Plug and Measure technology, a short polarization time, and a unique one-piece membrane design to support a fast installation and start-up process.
Easy-to-Service Dissolved Ozone Sensor
The membrane on the pureO3 dissolved ozone sensor is pre-mounted in a cartridge, enabling exceptionally easy replacement service with reduced servicing needs for optimized long-term measurement.
Maximize Lifetime, Minimize Downtime
Dissolved ozone sensors with Intelligent Sensor Management use predictive diagnostics to simplify handling, predict sensor maintenance and enable corrective action before measurements are affected.
Provides Continuous Measurement of O3
With its continuous measurement capabilities, the pureO3 dissolved ozone probe allows users to quickly react and make decisions based on changes in ozone levels.
Monitor Dissolved Ozone in Critical Processes
From sanitization on pharmaceutical water systems to verifying ozone concertation in UPW storage tanks, the pureO3 dissolved ozone sensor provides a reliable and highly accurate solution.
Support & Repair
Calibration & Quality
Training & Consulting
Ozone is a strong oxidizing gas that is injected into water or electrolytically generated in water. Dissolved ozone reverts back to harmless oxygen very quickly, depending on the temperature and pH of the water, so it must be generated and measured very close to the process. Dissolved ozone can be measured using a METTLER TOLEDO dissolved ozone sensor.
A dissolved ozone sensor is an analytical sensor that offers continuous monitoring and measurement of dissolved ozone in a water system.
The dissolved ozone probe from METTLER TOLEDO, the pureO3, uses a gas-permeable membrane to separate the sample from the electrochemical cell inside. Ozone diffuses through the membrane in direct proportion to the partial pressure of ozone outside the dissolved ozone sensor. The cathode (electrode from which conventional current leaves a polarized electrical device) and anode (electrode from which conventional current flows into a polarized electrical device) inside the probe are polarized with a voltage to enable the electrochemical reaction of ozone. Ozone is reduced at the cathode while the anode is oxidized, producing a small current in direct proportion to the amount of ozone reacting. A guard ring is provided around the cathode to protect the measurement from external interference. In addition, the dissolved ozone sensor uses the temperature value to convert the ozone partial pressure signal to a dissolved ozone concentration value by compensating for the changing solubility of ozone with temperature.
Calibration of a dissolved ozone sensor calculates new calibration constants for the sensor (zero current and a slope). Therefore, a zero current calibration procedure and a slope process calibration procedure have to be performed on the dissolved ozone sensor. For most applications, ozone-free air or water is used and provides the most reliable standard for the zero current calibration.