Uncover Scale-up and Safety Issues
OptiMax™ HFCal reproducibly delivers information for characterizing and scaling up processes to ensure they are safe at scale.
Understand Your Process Parameters
Heat data obtained under both isothermal and non-isothermal conditions enables the characterization of process parameters under process-like conditions.
Simple and Accurate Calorimetry
The Plug & Play calorimetry module enables determination of heat information accurately and precisely.
Material No.: 511628301
| Weight||35 kg|
| Operating Volume||60 mL – 1,000 mL|
| Dimensions (HxWxD)||78 cm x 39 cm x 42 cm|
| Temperature Range||-40 °C – 180 °C|
| Back / Front light||Yes/Yes|
| Precision Heat Transfer||Typically +/- 3%|
| Accuracy and Precision Specific Heat||Typically +/-10%|
| Accuracy Heat Flow|| Isothermal conditions: ± 3 % to 5 %|
Based on comparison of qr_hf with qc resp. ∫qr_hf with ∫ qc
Non-isothermal conditions: ± 5 % to 10%
| Calorimetry Type||Heat Flow|
| Material||OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150)|
| Temperature Modes||Jacket control, reaction mixture control, distillation control, crystallization control|
| Heating / Cooling||Solid State Thermostat|
| Power Requirements||100 – 240 VAC, 50/60Hz|
| Material Number(s)||511628301|
Faster Process Development
Characterize reaction parameters and collect heat information at the same time. The combination of heat information with real-time analytical data provides researchers with the relevant information for safe scale-up processes.
Precise Heating and Cooling
Powerful heating and rapid cooling combined with the unique control algorithm ensure that the temperature is maintained accurately and precisely between -40°C and 180°C, even if sudden exothermic reactions occur.
Accurate Data Analysis
With a single click, the iControl software automatically calculates and reports heat transfer data, the specific heat of the reaction mass, heat flow and reaction enthalpies.
|Cooling Performance||0°C 35 W |
20°C 65 W
40°C 95 W
|Temperature Range||-40°C to 180°C (jacket temperature)|
|Control Modes||isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization|
|Stirring||30 rpm to 1200 rpm|
|Dimensions||Thermostat: 388 mm x 414 mm x 539 mm|
|Power Supply||100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA|
|Operation||iControl software for calorimetric applications|
Graphical touchscreen and/or iControl Software
|Type||Single piece or two piece (with bottom drain valve)|
|Pressure||50 mbar to 1 bar|
|Stirrer||Pitch-blade (glass, Alloy 22)|
Anchor (glass, Alloy 22)
Half-moon (PTFE for single piece reactor)
|Calibration Heater||Max. 20 W|
|Precision Heat Transfer||Typically ± 3%|
|Accuracy and Precision Specific Heat||Typically ± 10%|
|Accuracy Heat Flow||Typically ± 3% to 5%, under isothermal conditions|
Typically ± 5% to 10%, under non-isothermal conditions
|Sensitivity||≤0.1 W measured as standard deviation of qr under steady state conditions.|
Peak-to-peak noise is ≤ approximately 0.4 W.
|Power and Data Interface||Direct connection to CAN interface of standard OptiMax,|
no additional power supply or PC connection required
|Data Logging||Via iControl Software|
|Dimensions||120 mm x 40 mm x 170 mm|
|Software||iControl 5.2 or higher required, HFCal license|