Gravimetric level sensors offer the most straightforward and reliable method for monitoring material storage levels, both locally and remotely via automation and ERP systems. By placing SLL210 AnyLevel gravimetric sensors below the tank, you ensure that material and environmental effects such as sidewall adhesion, dust, or foam do not distort your measurements to achieve readings that you can trust, every time.
Please describe your project. /content/us/en/home/products/Industrial_Weighing_Solutions/load-cell-and-weigh-module/sll210.fb.1.c.11.html
How can you expect to meet challenging requirements for materials storage without an efficient way to measure all kinds of materials? Uneven surfaces, bridging gaps and the build-up of vapor and foam within containers can all obscure true measurements. But what if you could turn your measurement problem on its head? Mettler Toledo's SLL210 any-level is a new type of level detection system that is simple, safe and easy to use. A universal future-ready solution compatible with every storage tank shape and material. Sensors installed below the tank remove the need to climb the tank and enable easy -to-read real-time monitoring of the contents without contacting the materials inside. Any level sensors plug directly into your PLC or DCS via IO link, HART or 4-20mA. Advanced condition monitoring indicates system status while SMART5 alarms notify you if something goes wrong. This solution is simple to install without the need for expert knowledge and comes with an easy-to-clean design. A unique bottom-up approach minimizes maintenance requirements and enables maximum uptime across your storage facility. Measure any type of material in any type of vessel, simply, safely and reliably. The universal choice for tank level detection. The SLL-210 any level from Mettler Toledo.
SLL210 AnyLevel™ Sensors
Universal Choice for Any Level Detection Application
Monitor virtually any material with a single sensing technology. SLL210 sensors provide reliable level detection across a wide range of industries and storage applications. Because measurements are based on weight, performance remains unaffected by dust, foam, viscosity, material buildup, or changing product characteristics. Simply select your required communication protocol and tank-foot connection.
Integrate and Use Without Expert Knowledge
Deploy level monitoring quickly and easily. SLL210 AnyLevel sensors simplify installation, commissioning, and operation. With multiple mechanical interface options, the sensors connect to most systems in just minutes. Simple cabling and robust connectors eliminate complicated wiring, and thanks to factory calibration, setup and maintenance is faster and easier right out of the box.
Minimal Maintenance, Maximum Uptime
Quickly and easily complete sensor inspections without the time and risk of climbing up on top of silos. Because sensors are installed outside the process, they are not exposed to the stored material, reducing the risk of sensor failure. If issues arise, real-time condition monitoring and Smart5TM alarms help you simplify troubleshooting and maintenance.
Designed for Simple Installation and Reliable Operation
The SLL210 AnyLevel delivers reliable, universal level measurement with minimal effort. Smart, daisy-chain connectivity, IO-Link integration, and ground-level installation make it easy to install, maintain, and monitor any tank or material.
Standardized IO-Link Interface
IO-Link has become one of the most popular, well-accepted manufacturer-independent protocols enabling flexible and seamless integration of sensors and actuators in industrial control systems. Customers appreciate its bi-directional data exchange, parameterization, and condition monitoring. SLL210 AnyLevel sensors provide IO-Link as a primary direct connection to PLCs and other control systems via standard cables and connectors, simplifying the installation. Automatic device identification and easy device parameterization enable swift replacements of defective sensors for increased uptime.
Daisy Chain and Automatic Self-Initialization
SLL210 AnyLevel are smart sensors connected in a daisy-chain topology, reducing complexity with no junction box or terminal required. In the daisy chain, each sensor has one male and one female connector, avoiding the risks of a wrong connection with a standard cable. The sensors automatically self-initialize and are powered up sequentially to exchange online information and communicate their positions in the daisy chain. The sensor directly connected to a PLC or other control systems is powered up first and becomes the master sensor. It cyclically communicates the condition monitoring information and the total weight value measured in the entire chain.
Easy Sensor Replacement
Defective sensors can be easily replaced, as all the parameters of the daisy chain (including the latest initialization, zeroing, span adjustment, GEO codes, or low and upper thresholds) have been saved during the previous self-initialization. After the replacement is complete, the sequential power-up starts, without requiring any action from the operator. During the process, the new sensors clone the previous configuration on their respective on-board electronics and automatically assign themselves a position in the daisy chain. The replacement sensors are installed, and the system is immediately running, reducing costly downtime.
Fit for Any Material Type
SLL210 AnyLevel sensors are fit to monitor granules, powders, liquids, and slurries, and can be used in Zone 2/22 and Division 2 hazardous areas.
Granules
In industries such as chemical manufacturing, companies may store granules of plastics, resins, or fertilizers. These granules may have different properties such as varying sizes, shapes, and densities. The SLL210 AnyLevel solution can accurately measure the level of any type of granules, making it a versatile choice for chemical companies.
Powders
For measuring powder in tanks, our innovative sensor technology not only delivers accurate readings but also eliminates the need for contact with the powder.
Liquids
When measuring liquid levels with other technologies, many characteristics such as high viscosity or foam can cause inaccurate readings. With SLL210 AnyLevel sensors installed outside of the tank, the material properties have no impact on measurements, so you can trust your results every time.
Slurries
Equip your slurry tank with SLL210 AnyLevel sensors to benefit from the advantages of an outside-the-tank installation. Not only will the cleaning process will be simplified as the sensor cannot cause contamination, but you also do not have to limit your mechanical design to account for stirrers.
We provide the highest ingress protection (IP68 /IP69K), which is also valid for the connectors.
What is the procedure to adjust the tank capacity?
The sensors can be used directly after installation thanks to the factory calibration. It is possible to set the zero point by pressing the button on the sensor at the corresponding deadload or refill load level. For the 4-20 mA HART version or the IO-Link protocol, the zero point as well as the upper threshold can be set in the corresponding software.
Should a sensor fail, is it easy to detect which one to exchange?
Yes, a user will get the information about which sensor shows a Smart5 alarm via the HART or the IO-LINK protocol.
Can I use the SLL210 AnyLevel for tank sizes smaller than 1 t?
Yes, this is possible. For example, 4 x 1 t sensors can be installed with a 400 kg tank. The resulting specific accuracy will decrease, as the 0.3% R.C. per sensor still corresponds to 3 kg per sensor. In turn, this will lead to an accuracy of 3% per tank leg.
Can the sensors be installed in hazardous areas?
Yes. The SLL210 AnyLevel™ sensors are approved for use in hazardous locations, including Zone 2/22 and Division 2 areas. In these applications, the sensors are installed in the hazardous area, while the ACS210xx AnyLevel™ unit is installed in a safe area.
Request Quote or InfoGet a QuoteInstant QuoteSolution InformationRequest a Demo
I want to…
Need assistance? Our team is here to help you achieve your goals! Speak with our experts.