The pharmaceutical industry is one of the largest consumers of water. As the need for more pharmaceutical products grows, so does the need for more water. As the world grapples with climate issues, there is a growing concern to look more closely at water usage, the costs, and how to optimize its use.
In partnership with American Pharmaceutical Review, we developed this infographic that summarizes why water use is so high in the industry, takes a look at regulatory and corporate initiatives to lower water use, and highlights available technologies to monitor and reduce water usage while maintaining product quality. Download the infographic to learn more.
Go green with water efficient TOC monitoring. Water and its scarcity is a growing issue today. And as water is the main excipient of almost all production processes for pharmaceutical industries, the costs of producing pure water and water for injection are substantial and the reduction of using water is critical. Over the next decade, pharmaceutical manufacturing is growing exponentially, and the demand for water to produce these products grows alongside with it. The production of high-purity water is a critical component to pharmaceutical manufacturing and highly expensive due to high energy costs. The ability to measure TOC in pharmaceutical water is a requirement per the global pharmacopeias. There are many reasons to go green when it comes to analyzing your TOC content. Like climate change and the impact of carbon emissions, many countries and organizations have been thinking about their water usage. In this regard, there are several initiatives to help understand and several reasons why green or low water usage TOC systems are essential to the pharmaceutical industry. There are many corporate initiatives that have been put into play at many corporations. One of those corporate initiatives being lowering carbon dioxide emissions or lowering waste or where we like the focus is lowering the water usage in a pharmaceutical plant. Meeting the needs of these corporate initiatives such as lowering water usage can be achieved with high efficiency TOC analyzers. The METTLER TOLEDO 6000TOCi total organic carbon sensor operates at a flow rate of only 8.5 milliliters per minute. minimizing the amount of expensive, high-quality water used for this crucial measurement. This water-efficient sensor's optimized flow rate can deliver high-cost water savings over a sensor's lifetime. The 6000TOCi's low water usage means less water is discharged from a pharmaceutical manufacturing plant. Many previous generation TOC monitoring systems use a membrane-based batch method that do not provide continuous data and consume considerable amounts of water to perform their analysis. As they operate at a flow rate of around 50 to 60 milliliters per minute, depending on many of these analyzers, this can lead to more than 600 liters of water lost to the drain every single week. The potential for missed TOC excursions is also possible with batch analyzers as they're not continuous measurements. In comparison, the 6000TOCi sensor delivers real-time, continuous TOC monitoring to improve your process control and operates at a flow rate of only 8.5 milliliters per minute, which only means 84 liters of water is wasted each week as opposed to the 600 liters. The Mettler Toledo 6000 TOC-i sensor consumes as little as a sixth of the amount of water needed compared to batch-based analyzers. To help organizations reduce water costs and fulfill the need to be more environmentally responsible, this is the best solution. An organization wishing to implement a greener TOC analysis process can therefore install this low-flow analyzer and realize the reduced costs of less wasted water in a short period of time.


