Hello and welcome to the Good Weighing Practice video series. This video emphasizes the importance of selecting A weighing device that is accurate enough for your intended weighing purpose. Doing this will ensure reliable testing results and good product quality. Every tool has an intended purpose. Imagine that you want to measure the height of a child. A simple tape measure would do, but you would never use a tape measure to calculate the length of a small engineered component. Likewise, you would not use a laser beam to measure the height of a child, unless you want to know what their height difference is with socks on. It is the same with weighing. The correct selection of a weighing device should not be made by referring to a data sheet alone. It should be linked to your weighing requirements, which at minimum should contain these four items. The maximum gross weight, the smallest net sample weight, your weighing process tolerance, which is defined in a percentage and is the allowable amount of error that your process can withstand. And of course, the safety factor. Mettler Toledo can help you choose the correct weighing device by using the principles of the Good Weighing Practice program. Let's make an example using this safe weighing range graph. The capacity of this device is 4 kilograms. The smallest net sample to be weighed is 30 grams. Please note that wherever measurements take place, there can be an error. We can express this error in a relative measurement uncertainty curve. We can clearly see that uncertainty increases dramatically when weighing small amounts. In this example, we will use a weighing tolerance of 1% and a safety factor of 2. As you can see, weighing above 18 grams is clearly within the safe weighing range. Weighing amounts between 9 and 18 grams will not achieve the required safety factor of 2 and therefore are a risk. Weighing under 9 grams means that these measurements could be outside the weighing requirement of 1% and could affect quality. Based on proven scientific principles, Mettler Toledo can advise you on the right choice of a weighing device by issuing A complementary GWP recommendation report. We can also advise you if your installed balances and scales are fit for purpose using a unique service called GWP verification. As a result, you can be sure that your weighing devices satisfy the quality requirements of your products and analyses. To learn more, check out other videos in our Good Weighing Practice video series.
Fit-for-Purpose: Safeguarding Precise and Reliable Measurements
In any manufacturing operation, weighing is a critical control point that impacts product quality, operational efficiency, and regulatory compliance, especially in challenging environments such as hazardous and hygienic zones. But not all scales are identical, and selecting the right weighing equipment is crucial for getting reliable results. A fit-for-purpose scale becomes an essential tool. When properly chosen, calibrated, and maintained, it helps make confident decisions, reduce waste, and safeguard product consistency.





