Operating Modes
The PANTHER PLUS terminal can be used in three different modes, depending on the application for which it is being used.
Indicator Mode - In Indicator Mode, the PANTHER PLUS terminal operates as a normal scale. You may weigh products on the platform in the gross or net state, and printing is possible. The over/under LEDs are not functional in this mode.
Over/Under Mode - Over/Under Mode is used when checkweighing products. A product is placed on the scale and compared to a target weight (up to 10 preprogrammed weights can be stored). The display can be programmed to show full gross weight or the difference from the target weight. The LEDs for Over, Under and Accept can be enabled to help operators easily determine if the product is within a preprogrammed tolerance of the target weight.
Setpoint Mode - Setpoint Mode is used to perform operations associated with filling and check filling applications. Setpoint and preact values can be set and used in this mode.Two other modes are also available in the PANTHER PLUS terminal to enable it to perform specific functions.
Setup Mode - Setup Mode is used for making programming selections to enable the PANTHER PLUS to be used for specific applications and to determine which functions will be available to the operator using the terminal. NOTE: This mode is only to be used by qualified personnel responsible for programming the PANTHER PLUS.
MEMORY Recall Mode - To recall a target weight from memory, Memory Recall Mode must be accessed by pressing the MEMORY key
This manual provides detailed information for operating the PANTHER PLUS Industrial Scale Terminal, a high performance, basic capability weighing instrument designed to meet the needs of simple weight indicating and over/under manual checkweighing. Information on installing, programming, and servicing the PANTHER PLUS terminal can be found in the PANTHER PLUS Terminal Technical Manual. Review all instructions and safety precautions carefully. Installation and service procedures should be performed only by authorized personnel. If you encounter problems not covered in this manual, please contact your authorized METTLER TOLEDO representative.
Operating Modes and States
To use the PANTHER PLUS terminal's various functions, you should first understand basic weighing terminology, the differences between gross and net state, and the terminal's various operating modes.
Gross and Net State
Gross State - A scale is in the gross state when a tare (the weight of a container holding the product to be weighed) has not been taken. The full weight of the items on the scale is shown on the display.
Net State - A scale is in the net state after a tare has been taken. Only the weight of the items added after the tare will be displayed and the net cursor will be lit.