Thermal Analysis System DSC 5+
The New Standard.
MultiStar™ sensor with 136 thermocouples
exceptional sensitivity for the measurement of weak effects
Power compensation
gives outstanding resolution for separation of close-lying effects
Patented electrical heat flow adjustment
saves time and provides superior accuracy
رقم المادة: 30674095
In-Depth Online Presentation of the DSC 5+
Click here to go to our in-depth online presentation of the new DSC 5+ instrument and automation options, the new MMS 1 sensor, and the AI-Powered identification and evaluation of all of types of thermal effects.
Product Family:ta-instruments00020002
المواصفات - Thermal Analysis System DSC 5+
| Temperature range | -150 °C – 700 °C |
| Indium peak (height to width) | 25 |
| TAWN resolution | 4 |
| TAWN sensitivity | 66 |
| Temperature precision (+/-) | 0.02 K |
FlexMode™ technology
choose power compensation or heat flux mode for optimal DSC performance
Time-saving FlexCal™ adjustment
guarantees accurate results under all measurement conditions
Unrivalled modular concept
tailor-made solutions for current and future needs
Wide temperature range
from -155 to 700 °C in one measurement
Robot with gas-purged sample chamber
The optional sample robot protects samples from the environment and operates reliably around the clock.
CombiCooler
This option is a combined LN2 cooling and intracooler for accessing the entire temperature range with reduced liquid nitrogen consumption.
الوثائق
الملحقات
خيارات التحليل الحراري وملحقاته | METTLER TOLEDO
المواد الاستهلاكية
البوتقات الذهبية للتحليل الحراري
Set of 6 gold crucibles with lids. The gold pan is chemically resistant. Apart from some types of the aluminum pans, it is the only pan that can be hermetically sealed by cold welding. The maximum permissible pressure is 0.25 MPa.
رقم المادة: 27220
بوتقات الضغط المرتفع للتحليل الحراري
Set of 25 crucibles (without pin), lids and rupture disks. The gold-plated steel crucibles have proven highly effective in the field of safety investigations. They can only be used for one measurement each. The maximum pressure is 15 MPa.
رقم المادة: 26731
بوتقات بلاتينية للتحليل الحراري
Set of 4 crucibles with lids. Platinum crucibles are mainly used for TGA or DSC measurements at temperatures above 640 °C. SDTA and DSC curves measured with platinum crucibles are usually better than those obtained using crucibles made of alumina.
رقم المادة: 51140842
بوتقات من الألومنيوم للتحليل الحراري
Set of 100 crucibles with lids. This is a standard type of pan for DSC measurements – it is very shallow (low in height) and has a strong flat base (this ensures that temperature gradients are as low as possible).
رقم المادة: 26763
Set of 400 crucibles without lids. This is a standard type of pan for DSC measurements – it is very shallow (low in height) and has a strong flat base (this ensures that temperature gradients are as low as possible).
رقم المادة: 51119870
Set of 100 crucibles with lids. The light aluminum pan gives the shortest signal time constant. The pan is particularly suitable for measuring polymer films, disks and powders – the samples are pressed down tightly against the base of the pan.
رقم المادة: 51119810
Set of 400 crucibles without lids. This large crucible is used for DSC measurements. It allows you to use larger quantities of sample if the signal obtained from the sample in a 40 µL pan is too weak.
رقم المادة: 51119872
بوتقات من الألومينا للتحليل الحراري
Set of 20 crucibles with lids. Alumina (aluminum oxide) crucibles are normally used for TGA measurements, above all when the TG signal, and not the SDTA signal, is important. After cleaning, these crucibles can be reused.
رقم المادة: 51140843