M700(X) Modular and Adaptive Transmitter - منتج متوقف

Discontinued since: Dec, 2020

For adaptable multi-parameter process control

The M700 is a flexible measuring system for continuous measurements in the field of liquid analysis. The M700X is intended for operation in locations subject to explosion hazards which require equipment of Group II, device category 2(1), gas/dust. Thanks to its modular design, the M700 can easily be adapted to your measuring task. Flexible use of plug-in modules allows combined measurements as well as later expansions or modifications. The measured variables depend on the measuring modules installed.

تحديد

المواصفات - M700(X) Modular and Adaptive Transmitter

Power Supply 24...230 V AC
Protection IP65
Current Output 2 outputs
Relays 4 relay contacts
Sensor inputs pH / O2 / Cond / Cond Ind
ISM yes
Communication PROFIBUS®-PA / Foundation Fieldbus
Features modular system
Mounting options wall, panel or pipe
Short description "Premium Line" - Simultaneous Measurement of pH, DO and Cond
Description
The freely selectable software functions (extended logbook, FDA 21 CFR Part 11 compliance support, ServiceScope etc.) increase safety, performance and diagnostics. Communication modules are available for further processing of the output signals.

The rugged enclosure (IP 65) can be wall or pipe mounted or fixed into a control panel. The M700 version with hygienic, polished stainless steel enclosure allows application in the field of biotechnology, food processing, and in the pharmaceutical industry. The M700 version with coated steel enclosure - extremely corrosion resistant - has been developed for application in the chemical industry, environmental engineering, water and wastewater treatment, and for application in power plants.

Features and Benefits
Cost savings through modularity
  • The modular concept allows integration of up to three modules into one basic instrument. Double channel measurement reduces total costs per measuring loop typical for fermentation processes (pH/DO) or redundant measurement in chemical processes (pH/pH).
 
Wide communication possibilities
  • The M700 has no communication limitations. Modules for PROFIBUS®-PA / Foundation Fieldbus and extended output modules fully integrate the M700 into all control systems.
 
Application oriented
  • Enclosure designs are available for all application areas / environments, e.g. for hazardous areas and hygienic environments.

      

التوثيق

دراسات الحالة

Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters

التطبيقات

Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Minimizing Inerting System Maintenance
This white paper explains how TDL O₂ sensor can minimize inerting system maintenance & how to integrate them into a DCS system for fully automated oxy...
Minimizing Inerting System Maintenance
This white paper explains how TDL O₂ sensor can minimize inerting system maintenance & how to integrate them into a DCS system for fully automated oxy...

المنتجات والحلول ذات الصلة

Cleaning System EasyClean 400-NCC2
EasyClean400 is used for fully automatic cleaning and calibration of pH measuring points. It provides a flexible system solution which can either be i...
Cleaning System EasyClean 200e
The distinctive automatic sensor cleaning system for METTLER TOLEDO InTrac retractable housings
Cleaning System EasyClean 150
EasyClean150 is designed for the automated flushing of sensors installed in a pneumatically operated retractable housing. The system controls the move...

Support Software

Profibus® PA - Device Description Files (DD)
This site contains the General Station Description (GSD) file and the Device Description (DD) files for the Siemens Simatic PDM tool of all METTLER TO...
ProTrim - Update Software for the M 700 Transmitter
ProTrim is an update software for the M 700 transmitter to facilitate the update of your M 700 system from version 4.x/5.x to version 6.0. It is a con...

مُكَمِّلات

المواد الاستهلاكية

برمجة

More Information

أريد أن...
Need assistance?
Our team is here to achieve your goals. Speak with our experts.