pH Sensor InLab® Flow
Origin of Precision.A glass-body, combination pH electrode with SteadyForceTM and S7 screw head for measurement in flow-through cell 611.
Reliability on the next level
SteadyForceTM reference system is pressurized to prevent the junction from clogging, guaranteeing extremely reliable and reproducible results.
Flexible connectivity
The S7 sensor head offers flexibility and can easily be connected to any meter.
The right sensor for every application
METTLER TOLEDO offers pH and other sensors for all kinds of applications. Find the best suited sensor for your application here: www.electrodes.net.
Material No.: 59902917
Product Family:pH-sensor00020055
Spesifikasi - pH Sensor InLab® Flow
| Measuring range | pH 1 – 11 |
| Temperature Range | 0 °C – 80 °C |
| Type of junction | Double ceramic |
| Shaft Material | Glass |
| Sensor Type | Combined electrode |
| Shaft length | 40 mm |
| Shaft Diameter | 7 mm |
| Parameter | pH |
| Reference System | SteadyForce™ |
| Reference electrolyte | DPA Gel |
| Membrane glass | LoT |
| Membrane resistance (25°C) | < 250 MΩ |
| Intelligent Sensor Management (ISM®) | No |
| Temperature Probe | No |
| Low Maintenance | Yes |
| Signal type | Analog |
| Sensor Characteristics | Chemically robust |
| Sample Volume | >= 20 mL |
| Cable Included | No |
| Connector to Meter | Flexible (detachable cable) |
| Typical Samples | Water Cola |
| Connector on Sensor | S7 |
| Sample Composition | Aqueous |
| Sample Consistency | Liquid Emulsion Sludge / slurry / suspension |
| Sample Temperature | 0°-100°C |
| Minimum Sample Volume uL | 20 mL |
