Density Measurement: All You Need to Know - Mettler Toledo

What is Density?

All You Need to Know about Density Measurement

Density Measurement - Mobile
How to Determine the Density of Solid Samples on a Balance

What is Density? - How to measure Density? – What are the main applications of Density?

In this video, you will become an expert on how to measure density of liquids and the best methods to measure it.
How to Determine the Density of Solid Samples on a Balance
Difference in Density - Mobile

Hydrometers

Measuring principle

  • Glass body inserted into sample
  • Glass body floats at a certain level due to the buoyancy and mass of the hydrometer, dependent on sample density
  • Level of equilibration shows the density on the calibrated scale

 

Strengths

  • Simple, inexpensive
  • Used for a quick check of an approximate density value

Weaknesses

  • User-dependent results
  • Takes a long time to equilibrate the temperature
  • Small measuring range (typically takes 20 hydrometers to cover a wide range)
  • Large sample volume required (140 mL to 600 mL)
  • Difficult to clean
  • Not suitable for GLP
  • Breakable
  • Sample must be removed from sample container and poured into the hydrometer

Pycnometers

Pycnometers
Pycnometers

Measuring principle

  • Glass beaker of defined volume
  • Weighed without sample (M1), then with a sample (M2)
  • Density calculated based on the following formula:
    Density = (M2 − M1)/Flask Volume

Strengths

  • Inexpensive
  • Directly related to the definition of density (mass divided by volume): ideal for academia / education

Weaknesses

  • User-dependent results
  • Pycnometers are calibrated for a certain temperature, e.g. 20 °C, so measurements are only valid at that temperature! The sample must be equilibrated to the calibration temperature.
  • Density must be calculated
  • Typical sample volume required is 25 mL
  • High level of user training required to ensure accurate, trustworthy measurements
  • Sample must be removed from sample container and added to pycnometer

Digital Density Meters

Digital Density Meters
Digital Density Meters

Measuring principle

  • Oscillating U-tube
  • A hollow glass tube vibrates at a certain frequency. This frequency changes when the tube is filled with the sample: the higher the mass of the sample, the lower the frequency measurement is and converted into density. A built-in Peltier thermostat controls the temperature precisely of the benchtops instrument (no water bath required)

Strengths

  • Easy to use
  • Small sample volume
  • Automatic measurement means results are operator independent
  • Built-in temperature compensation
  • Offers storage of up to 1100 results and the possibility to connect to PC software for data management
  • Sample can be measured directly from the sample container

Weaknesses

  • More expensive in comparison to hydrometers or pycnometers

Manual to Digital Density Measurement

Manual to Digital Density Measurement

Molecule at a given temperature
(slight movements)

Same molecule when temperature increases
(moving further apart)

Glass Pycnometer
density determination
Mass in vacuum=True density
Mass in vacuum = True density

To illustrate the difference between true density and apparent density, we have a pycnometer placed onto a balance. When it is filled with a liquid, it weighs less in air than in a vacuum due to the buoyancy effect of air.

Many official density tables are still based on apparent density. Digital density meters deliver results in different units and concentrations, check out their specifications.

Mass in air=Apparent density
Mass in air = Apparent density
Density Measurement - Sample Preparation
SimpleCheck™ Density test


 

What is the difference between density and mass?

Mass is a measure of how much matter there is within an object or liquid while density expresses how much mass there is per a certain amount of volume.

For example, 10 kg of steel and 10 kg of feathers have the same mass, but different volumes therefore they have different densities.


 

Why can density be used to identify a sample?

Density can easily be used to identify a pure sample because each element has a unique density. After a measurement, the density of the sample in question can be looked up to see what it corresponds to.


 

How is the density of solutions measured?

Let's take a solution of ethanol in water as an example.

As shown before, at 20 °C pure water has a density of d = 0.9982 g/cm3, and pure ethanol has a density of d = 0.7892 g/cm3 at 20 °C. A solution of ethanol/water will have a density value which depends on the concentration of the solution.

 


 

Is density directly proportional to pressure?

Density is directly proportional to the local air pressure but indirectly proportional to temperature. At a constant temperature, when pressure increases density increases. Learn more about the relationship between density of liquids and pressure here.

 


 

What are some typical applications of density measurement?

Wort Measurement in Beer Application

 

Some applications of density measurement includes the determination of alcohol concentration in spirits, control of fermentation process in wine and beer production, Brix (sugar content) measurement of intermediate and final products in food and beverages products. Density and other concentration as API gravity in heavy oils, paraffin and lubricants in the Petrochemical segment. Density (specific gravity) in battery acid in the automobile industry, as well as other solvents, acids and bases in the chemical industry. Lastly, there are many applications in the pharmaceutical industry, such as the density measurement of specific gravity in cosmetics, personal care products, and many more. Click on the links above to read our detailed applications or access our expertise library to find the right application note according to your sample.

 

 

 

 

Products

Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.