Seminar

Live Webinar: Thermomechanical Analysis (TMA)

Learn Basic Principles, Measurement Modes, and Useful Applications for Your Workplace

Pregled programa

  • Basic principles of TMA
  • Important instrument components
  • Measurement modes (dilatometry, penetration, tension, swelling, dynamic load, bending)
  • Why you should use TMA for your analysis
  • Application examples for different industries

Thermomechanical analysis (TMA) is used to measure the dimensional changes, or deformation, of a sample as it is heated or cooled and subjected to a defined stress or load. It determines expansion, shrinking, and softening behavior on materials such as films, laminates, solids, and fibers. The technique is also very useful for measuring relaxation effects that are often not detected by DSC.

 

The TMA Technique

In a typical TMA experiment, the sample is placed on the sample support and a constant load is applied via a measuring probe. The probe remains in contact with the sample and moves up or down as the sample expands or contracts with a change in temperature. The displacement of the probe is measured by means of a sensor. The sample set-up and applied load vary depending on the measurement mode and the information required.

Thermal expansion or shrinkage, as well as the deformation or stiffness of the material, can be determined based on the set-up and measured displacement. Typical properties of interest determined by TMA are the glass transition, coefficient of thermal expansion (CTE), and Young’s modulus.

TMA is a versatile technique that can be used to study a wide range of materials, including polymers, composites, ceramics, metals, and biomaterials. It is commonly used in material research, quality control, and failure analysis applications.

Join our live webinar to learn all about TMA and don’t miss the opportunity to ask our experts your questions!

Expert

Nicolas Fedelich

Nicolas Fedelich

With a background in chemical engineering, Nicolas joined METTLER TOLEDO in 2009 as an application specialist for Thermal Analysis. Before that, he gained expertise in different laboratories implementing, developing, and validating analytical methods in both the pharmaceutical and environmental fields. Nicolas also worked for three years in the field carrying out on-site customer training and providing expert thermal analysis application support. In his present position, Nicolas expertly uses, teaches, and supports DSC, TGA, TMA, and DMA instruments at the METTLER TOLEDO head office in Switzerland.