Five key benefits of automatic metal detector testing in free fall applications. Manually testing metal detectors was once considered essential to help ensure systems were working to specification and delivering compliance and brand protection. However, there are many downsides to manual testing. Not only is it highly disruptive, it can also be inaccurate and put workers' safety at risk. Did you know that all the latest Mettler Toledo throat and gravity fall systems are now available with an approved automatic test system known as ATS? ATS is a non-invasive method of testing which uses a device that sits inside the metal detector's aperture and has been designed specifically to address some of the biggest pitfalls associated with manual testing vertical systems. Number one, compliance assured, confirmed centreline sensitivity. Ensuring accurate results can be particularly challenging when testing vertical metal detectors using snack food and confectionery applications and gravity-fed applications such as powder processing. We know test pieces are often dropped down the metal detector's aperture, delivering random and unreliable results. ATS is the only test method that we believe confirms centreline sensitivity, whilst using physical test pieces, as instructed in many industry standards. The centreline is the least sensitive part of a metal detector, and ATS uses an algorithm that correlates centreline sensitivity with edge -of-aperture sensitivity, eliminating the random nature of vertical metal detector testing. Number two, increased productivity, testing in under 40 seconds. Production downtime hurts the bottom line, and with schedules often tight, every stoppage represents lost production capacity and the potential for additional problems elsewhere. Metal detector testing using ATS requires one rather than two operators to carry out a complete end-to-end three metal test. This can be done in under 40 seconds compared to the average three to four minutes using more traditional manual methods of testing. Number three. Improve product quality. No cross-contamination threat. It takes time and consistency of products and processes to build a reputation for quality. However, this hard-won reputation can suffer irreparable damage because of a product recall, a costly scenario every manufacturer wants to avoid. ETS is non-invasive, ensuring test pieces don't come into contact with the food. This provides assurances that there is no risk of cross-contamination. This is particularly important when inspecting gravity-fed applications, such as powdered infant formula, where product quality and safety is paramount. Number four, enhanced operator safety, remote testing. Providing a safe working environment for employees is of vital importance. Metal detectors in vertical packing applications are often installed in inaccessible places due to their location in the production process. Conducting routine performance monitoring tests can require operators to work at height and regularly climb ladders. ATS virtually eliminates the need to work at height and removes the need for operators to reach across installed equipment to insert the test sample into the product flow. Number five, enables automatic record keeping, reduced risk of error. Testing metal detectors can often result in lots of extra paperwork from manual test records. Not only does this risk the loss of documentation and errors, but it can also be time consuming for someone to manually input the test results into a database. Fortunately, ATS can be used with Metler Toledo's data collection and management system, Prodex. When used with products, electronic records are automatically documented and stored for future reference. This reduces the risk of errors associated with paper records and the need for physical storage.
Let’s put ourselves in the position of a production line operator who must test metal detectors used in free-fall applications; they are likely to face several daily challenges. Firstly, interrupting production multiple times per shift to verify the metal detector continues to work as it should. Secondly, manually recording test results and filing them correctly. Thirdly, climbing ladders and stretching across equipment, which can put their safety at risk. Switching from manual testing processes to automatic ones can overcome these challenges and deliver tangible benefits.
What is Automatic Test System?
Automatic Test System (ATS) from METTLER TOLEDO is a value-added accessory that can be supplied at the point of sale, or retro-fitted to compatible metal detectors used to inspect free-falling product in vertical packaging or gravity-fed applications. Throat metal detectors are typically used to inspect products such as crisps, sweets, nuts and cereals in Vertical Form, Fill & Seal (VFFS) processes. Gravity Fall metal detection systems are most often used to inspect bulk granular and powdered products prior to the packaging stage such as infant formula, sugar, flour, nutraceuticals, and fertilizers.
With ATS, the test samples sit inside the metal detector’s aperture and the pneumatic control transports each test sample in turn to a defined position above the principal sensing coils within the metal detector. The test sample is then released, simulating the presence of a contaminant in free-fall under gravity.
This replaces the traditional method of manual testing where your operators would likely have had to work at height, randomly introducing samples to conduct routine metal detector performance tests. Now, a software algorithm within the ATS correlates sensitivity readings from the position of the ATS to the center, offering precise detection and confirming centerline (worst case) sensitivity.
5 Benefits to Automatic Testing
Compliance assured. Confirm centreline sensitivity. Ensuring accurate results can be particularly challenging when testing vertical metal detectors using snack food and confectionery applications and gravity fed applications such as powder processing. We know test pieces are often dropped down the metal detector's aperture delivering random and unreliable results. ATS is the only test method that we believe confirms centreline sensitivity. Whilst using physical test pieces as instructed in many industry standards, the Centreline is the least sensitive part of a metal detector, and ATS uses an algorithm that correlates Centreline sensitivity with edge of aperture sensitivity, eliminating the random nature of vertical metal detector testing.
Assured Compliance by Confirming Centerline Sensitivity
Conventional performance testing can be almost impossible to consistently test the center of the aperture – the weakest point of detection (confirming worst-case performance of the metal detector). ATS uses ferrous, non-ferrous and stainless-steel test pieces (aluminum option also available) and a second detection threshold to confirm centerline sensitivity and improve testing accuracy.
Due to its accurate centerline testing, ATS is acknowledged as a best practice for achieving compliance with stringent quality standards. It aligns with the Global Food Safety Initiative (GFSI) guidelines, providing a reliable method for meeting regulatory requirements and maintaining food safety standards. Plus, a high street retailer is now citing it in their code of practice.
Increased productivity. Testing in under 40 seconds. Production downtime hurts the bottom line, and with schedules often tight, every stoppage represents lost production capacity and the potential for additional problems elsewhere. Metal detector testing using ATS requires one rather than two operators to carry out a complete end-to-end three-metal test. This can be done in under 40 seconds compared to the average 3 to 4 minutes using more traditional manual methods of testing.
Increased Productivity: Testing in Under 40 Seconds
ATS virtually eliminates the need for manual intervention and associated production line stoppages, seamlessly integrating testing processes into ongoing production to maximize output. Unlike manual testing which typically requires two operators to complete the routine performance tests, ATS requires only one operator to run the end-to-end process.
By streamlining testing procedures and reducing testing times to under 40 seconds, ATS can deliver substantial savings in both time and resources, enhancing operational efficiency.
Improved product quality, no cross-contamination threat. It takes time and consistency of products and processes to build a reputation for quality. However, this hard-won reputation can suffer irreparable damage because of a product recall, a costly scenario every manufacturer wants to avoid. ETS is non-invasive, ensuring test pieces don't come into contact with the food. This provides assurances that there is no risk of cross-contamination. This is particularly important when inspecting gravity fed applications, such as powdered infant formula, where product quality and safety is paramount.
Improved Product Quality: No Cross-Contamination
ATS adopts a non-invasive testing approach, minimizing the risk of cross-contamination inherent in manual methods, upholding stringent food safety standards.
Enhanced operator safety. Remote testing. Providing a safe working environment for employees is of vital importance. Metal detectors in vertical packing applications are often installed in inaccessible places due to their location in the production process. Conducting routine performance monitoring tests can require operators to work at height and regularly climb ladders. ATS virtually eliminates the need to work at height and removes the need for operators to reach across installed equipment to insert the test sample into the product flow.
Enhanced Operator Safety: Remote Testing
ATS virtually eliminates the need to work at height to complete performance tests of vertical packaging applications and removes the need to reach across production equipment to insert test samples into the product flow.
Moving away from having to ask your operators to work at height to routinely conduct performance monitoring tests instantly improves operator worker safety.
Enables automatic record keeping, reduced risk of error. Testing metal detectors can often result in lots of extra paperwork from manual test records. Not only does this risk the loss of documentation and errors, but it can also be time consuming for someone to manually input the test results into a database. Fortunately, ATS can be used with Mettler Toledo's data collection and management system, Prodex. When used with products, electronic records are automatically documented and stored for future reference. This reduces the risk of errors associated with paper records and the need for physical storage.
ProdX allows you to automate reporting and manage data, helping you to enhance efficiency and sustainability while meeting the demands of modern manufacturing practices. Electronic records can also help facilitate compliance with evolving industry standards and regulatory requirements and provide the necessary information in the event of a product recall or audit.
Investing in an approved metal detection Automatic Test System is essential if you want to make sure your equipment is working correctly, every time. Automatic Test Systems help you meet compliance needs, while increasing productivity and improving product quality.
Automatic Test System (ATS) from METTLER TOLEDO can help ease the burden of testing Throat and Gravity Fall metal detection systems. It is designed to improve the accuracy of performance monitoring tests and reduce the time it takes to carry them out.
Download our “5 Reasons to Invest in Automatic Test System” application note to discover how an Automatic Test System can deliver significant quality and productivity benefits to your business.
Kati plays a pivotal role in cultivating strong relationships with global key clients, driving strategic partnerships, and ensuring client satisfaction. She has a wealth of expertise in product inspection with over 20 years’ experience in international sales channel development and management and has a proven track record of accelerating overseas sales growth. Kati excels in appointing and onboarding new distributors while leveraging existing relationships to unlock new business opportunities. Her expertise consistently delivers results and fosters sustainable growth across diverse markets and business environments.
Request Quote or InfoGet a QuoteInstant QuoteSolution InformationRequest a Demo
I want to…
Need assistance? Our team is here to help you achieve your goals! Speak with our experts.