案例分享

Maxim Group relies on glass vision inspection solution

案例分享

Preventing damaged or defective crucibles from entering the production process

As part of a planned expansion of its North American business, Maxim Group, a manufacturer of cosmetic products, performed an evaluation of its safety and quality assurance procedures, specifically those related to the glass containers for their cosmetics. After this evaluation, they decided to partner with METTLER TOLEDO to install a vision system to perform additional quality inspections.

The Cost of Expansion
The renewed focus on the quality of their glass containers sprang from regulations in the US related to consumer safety. Maxim was already compliant with the standards and good manufacturing practices of the IFS, but made a consious decision to take another step in securing their production lines by installing a vision inspection solution.

Detecting Glass Splinters and Cracks
The glass containers used in Maxim's production process come from outside suppliers. These suppliers have their own quality assurance process, but Maxim wanted an additional layer of quality assurance before the filling process. The vision inspection system performs a two-stage inspection on the glass containers. One camera inspects for glass shards, while another set of cameras inspects for chipped tops or flaws in the threads of the sealing face. Flawed containers are removed from the production line, and the containers that pass inspection are sent along into the production process. 

Vision Inspection Glass Solution at Maxim Group

Not Just Risk Management
In addition to preventing recalls, the system's presence reduces the occurrence of problems during the filling process, preventing stoppages caused by broken glass and improving the overall throughput of the production process. The system's connection with Maxim's production network allows the company to remotely monitor the production process, and carry out remote maintenance when necessary.

An Important Risk Control Solution
Ultimately, by performing glass inspection, the METTLER TOLEDO vision inspection system is able to provide an important point of control over the quality of the products. The system both prevents damaged containers from causing trouble during the production process, and enables the company to make further improvements to their production process by providing detailed runtime statistical data. This makes the system a critical control point in Maxim's quality control process.

案例研究

Perfect Pizza 的三種技術
聰明結合了三種技術、視覺檢測、金屬檢測和檢重。
Crofters Foods chooses METTLER TOLEDO
Crofters Foods relies on the integrated hardware and software from METTLER TOLEDO CI-Vision for innovative solutions