Characterization of Thermosets by Means of Thermal Analysis
On Demand Webinar

Webinar – Thermal Analysis of Thermosets

On Demand Webinar

Thermal Analysis Is an Excellent Method for the Identification and Characterization of Thermosets

Thermosets are used for components that must be rigid, insoluble and of high mechanical strength and temperature stability. Production and processing are cheaper compared with metals. The four main techniques of thermal analysis, DSC, TGA, TMA, and DMA are ideal for characterizing such materials. The chief advantage is that properties can be measured as a function of temperature or time over a wide temperature range, from –150 to 1600 °C.

In this Webinar, we will show how thermal analysis is used to analyze thermosets and will present some typical examples of samples measured by DSC, TGA, TMA, or DMA.

39:23 min

The Webinar covers the following topics:

  • Introduction
  • Basic properties of thermosets
  • Typical questions
  • Thermal analysis
  • Industries and applications
  • Instrumentation and applications
    - Differential Scanning Calorimetry (DSC)
    - Thermogravimetry (TGA)
    - Thermomechanical Analysis (TMA)
    - Dynamic Mechanical Analysis (DMA)
  • Summary

Thermal analysis is an excellent method for the identification and characterization of thermosets because their properties are strongly temperature dependent.

What is a thermoset?
Thermosets are polymers that can undergo a permanent chemical reaction known as curing to form a giant crosslinked network structure. They are also known as thermosetting polymers, resins or plastics. Fully cured themosets are rigid, typically insoluble solid materials of high mechanical strength and high temperature stability. In contrast to thermoplastics, thermosets cannot be melted and remolded to other shapes after curing.

Characterization of thermosets
Thermal analysis can be used to determine many of the key properties of thermosets. For example, an important application is the measurement of the glass transition and the curing reaction in epoxy resin systems.
The most important effects that can be analyzed by DSC are the glass transition, melting behavior, reaction enthalpies, curing, and thermal stability.
TMA is normally used to study the mechanical behavior of materials such as expansion, shrinkage, softening, and the glass transition.
DMA is the best method for characterizing the viscoelastic behavior of materials, the glass transition, and the frequency dependence of effects.
The main applications of TGA are compositional analysis, thermal stability and decomposition, and evaporation and desorption behavior.

This webinar discusses the most important thermal properties of thermosets and describes the thermal analysis techniques that can be used to measure them.

Thank you for visiting We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing