IND780 Advanced Weighing Terminal
Power and Performance for Advanced Weighing Applications
The IND780 is a highly flexible terminal capable of supporting simple to complex, stand-alone to integrated weighing and control applications. A wide range of communications interfaces are available, including serial, Ethernet, USB and a variety of fieldbuses.
Especificaciones - IND780 Advanced Weighing Terminal
| Básculas | Analógica; IDNet; Powercell; POWERCELL PDX; X-Base |
| Comunicación | RS232; Ethernet TCP/IP; USB |
| Software de aplicación | Loteado; ; Remoto |
| Comunicación (opcional) | Allen-Bradley RIO; PROFIBUS DP; E/S Digitales; ControlNet; PROFINET; Ethernet/IP; DeviceNet |
| Flexibilidad de montaje | Columna; Mesa; Panel; Pared |
| Voltaje | Versión de CA |
| Pantalla | VFD matricial activa |
| Dimensiones (LxAxA) | 299 mm x 200 mm x 141 mm |
| Flexibilidad de montaje de la pantalla | Unidad integrada |
| Teclado numérico | Teclado alfanumérico |
| Interfaces | 4E/4S/Salida analógica de 4-20 mA/Allen-Bradley RIO/ControlNet/RS232/422/485/Flux/PROFIBUS DP/DeviceNet/EtherNet/IP |
| Clasificación de protección | IP69k |
| Aprobación para zonas peligrosas | No |
| Construcción | Acero inoxidable |
| Calibración CalFREE | Sí |
| Programable de forma personalizada | Sí |
| Diseño higiénico | Sí |
| Número de material | 64087983 |
Description
Optimize the amount of visible information with the graphical LCD display. Configure up to four scales and a metrologically approved sum scale, then view one or all simultaneously.The IND780’s multiprocessor design provides the fastest A/D performance at 366 Hz, with TraxDSP digital filtering for rough weighing conditions. Configurable softkeys permit single key press operation of important features and functions. The built-in predictive maintenance and diagnostics features help predict errors and plan scale maintenance, rather than react after a scale is already down.
Features and Benefits
- A simple operating system with an enhanced graphical display and SmartTrac™ – Improves the speed and accuracy of manual or semi-automatic operations, with three display modes that relate weight status to target graphically
- An array of integrated functions - Including Step Calibration, CalFREE™, TraxDSP™ Digital Filtering and TraxEMT™ Maintenance Diagnostics Suite
- Multiple measurement channels - Allow concurrent scale measurement and control in a single terminal for hardware and engineering cost savings
- Internal target/setpoint I/O controls - Internal digital I/O for direct material transfer control imporoves speed and accuracy in weigh-in or weigh-out feeding processes
- Target Table - Eliminates the need for repetitive data entry by storing numerous target and tolerance records for over/under checkweighing or material feed control applications
- MinWeigh® - Ensures compliance and prevents inaccurate measurements by monitoring the scale for any weighments below a specified minimum
- Cluster networking - Provides remote terminal access over an Ethernet LAN network, for flexible distribution of control and data
