The XPR Automatic Balance combines high-precision weighing with automation to dispense powders and liquids with high accuracy. It supports companies across various industries on their journey to automation, enabling sustainable innovation and lasting gains in performance.
Dispense in Milligrams
Get repeatable dispensing results with guaranteed accuracy down to less than 1 mg. Use for both manual and automatic weighing to optimize your weighing processes.
Prepare Solutions and Dilutions
Eliminate user error, increase accuracy, and save time.
Fill Capsules, Vials, and Bottles
Improve ergonomics and limit exposure to hazardous substances.
USP 41 and Ph. Eur. 2.1.7 Chapters on Balances
Ensure Compliance with the latest Requirements
Learn more
Solution Preparation and Dilutions—Solved
The preparation of solutions and dilutions has never been easier or more precise.
First, dispense powders automatically or manually. Then, our autodilutor dispenses the exact amount of solvent to achieve a target concentration.
Achieve a dilution factor of 10’000 in a single step (at ca. 100 ml total volume)
Simply store your powders in our dosing heads and let the automatic balance do the rest! Our dosing heads connect directly to the automatic balance for precise dispensing of almost any powder, even if they are electrostatically charged, acidic, hygroscopic, or sticky.
The automatic balance can:
Dose quantities below 1 mg at a readability of 2 µg
Be placed in a safety cabinet and glove box
Prepare 30 samples in one run using a sample changer
The XPR Automatic Balance, paired with a sample changer, automates dosing various APIs, and it is often used in preclinical studies. The sample changer drives further process innovation:
Narrow tolerances (e.g., 1%) at 4 mg USP minimum weight possible
Dispense 3x faster than filling capsules manually
Use in a safety cabinet or glove box for user safety
Fill up to 30 capsules from sizes 000-4 in a single run
For increased speed and throughput, the CHRONECT system combines the advanced weighing and dispensing technology of the XPR Automatic Balance with a 6-axis robotic arm.
Fully automatic weighing of up to 288 samples
Dispensing of 6 liquids and 32 powders
Additional modules, including capping, vortexing, dilution, and heating
For high-throughput preparation of compounds that involve dispensing small quantities of hundreds of substances (less than 10 mg) into small vials, this is a widely adopted solution.
This video demonstrates how to create and edit a method to dispense powders automatically on an XPR Automatic Balance and explains the various settings.
How to Create and Run a Formulation Method
Learn how to create, edit, and run a method for formulation on the XPR Automatic Balance. The various options for itemized automated dosing of your formulation components are explained.
How to Set Up Automatic Liquid Dispensing
This video demonstrates how to create and edit a method to dispense liquids automatically on an XPR Automatic Balance and explains the various settings.
How To Set Up a Liquid Tolerance Profile
Learn how to set up a liquid tolerance profile on the XPR Automatic Balance, with all the options clearly explained.
How to Prepare Solutions
Discover three ways to prepare solutions on an XPR Automatic Balance. This video explains how to set up automatic dispensing to get highly accurate target concentrations.
How to Perform Dilution
Learn how to create, edit, and run a method for dilution on the XPR Automatic Balance. The various options for manual dosing of the solute combined with automated dosing of the solvent are explained.
How to Manually Set the Position of the Dosing Head
Learn how to customize the dispensing height of the dosing head on the XPR Automatic Balance. This enables you to dispense powders and liquids perfectly and automatically directly into any weighing vessel.
How to Edit The Data on the Dosing Head
This video explains how to edit information such as substance, LOT, expiry date, quantity available, tapping function, limit change, and the density and pump pressure of the liquid dosing head.
How to Add Label Printing to a Method
This short video demonstrates how to add automatic label printing to a method on an XPR Automatic Balance. Learn how to edit the label settings and have task and sample labels printed automatically at the end of each procedure.
Options for XPR Automatic Balance Configurations
Powder and Liquid Dispensing
The Q3 dosing module is an upgrade for an XPR Analytical Balance enabling both powder and liquid dispensing. Depending on the target min-weight or maximum capacity, the appropriate balance can be chosen.
Liquid Dispensing Only
The QLX3 dosing module can dose liquids only. It is suited for dilutions or processes in which powders are dispensed manually and an exact solution is obtained with automatic liquid dispensing.
Sample Changer
The sample changer is an upgrade for the XPR Automatic Balance that allows for the automatic dispensing of up to 30 samples of powders and liquids in a single run.
Discover the possibilities of automatic weighing with METTLER TOLEDO's XPR Automatic Balance. Watch the video to learn why the balance is the new standard in laboratory weighing. Automatically weigh powders and liquids, including unattended weighing of up to 30 samples in one run.
Mettler Toledo. XPR Automatic Balance is the world's first instrument that sets the new standard for weighing in the lab, today and in the future. But what is really exciting about it is that everybody can operate it without any special training. It is the simplest way of weighing. Watch our video and see how it's done. The XPR Automatic Balance Manual weighing can be tedious, inefficient and error-prone. Weighing is an essential step of the analytical process and any inaccuracies produced during this stage will be carried downstream and affect the entire workflow. Take charge of your analytical processes with METTLER TOLEDO's XPR Automatic Balance. 50% less out-of-specification errors, maximum user safety, high accuracy and low milligram levels, precise concentrations down to 0.1 mg/g, achieving a dilution factor of 10,000 in one step, unattended filling of up to 30 containers in one run. Click the link below to find out how to achieve a fast ROI using automated weighing: https://www.mt.com/us/en/home/products/laboratory-weighing-solutions/analytical/excellence/xpr-automatic-balance.html?cmp=smo_GLO_YT_LAB_OTH_Youtube_LAB_GmExeB86OFk #METTLERTOLEDO #LaboratoryWeighing #XPRAutomaticBalance The minimum net sample weight can be therefore reduced by up to 30%. This means you can make considerable savings by using less of your expensive and rare samples. Moreover, highly reproducible results of the automated dispensing help you eliminate potential sources of error and avoid rework, so you save your precious time. Manual weighing can be tedious, inefficient and error-prone. Weighing is an essential step of the analytical process and any inaccuracies produced during this stage will be carried downstream and affect the entire workflow. Take charge of your analytical processes with METTLER TOLEDO's XPR Automatic Balance. Improved user safety is an important advantage of the XPR automatic balance. Sample is closed in the dosing head and dispensed directly into the target container, minimizing operators' exposure to toxic or chemically aggressive substances. Moreover, automated dispensing eliminates the risk of spillage. If necessary, The whole system can be easily placed inside the safety cabinet or glove box thanks to its extremely small footprint. With the XPR automatic balance, you can dispense not only powder but also liquid. Just change the dosing head and perform adding the solvent. It is so easy. This advantage of automatic balance is especially important If you need to prepare exact concentrations, even as low as 0.1 milligram per gram, the XPR automatic balance is an ideal partner for highly accurate gravimetric solution preparation in just one step. The balance calculates the precise amount of solvent required based on the amount of substance dosed in the first step to produce the target concentration. Serial dilutions can be reached efficiently without multiple dilution series as the XPR automatic balance can achieve a dilution factor of even 10,000 in a single step. Thanks to gravimetric approach, you avoid repetitive, time-consuming manual weighing and reduce process steps. You prepare only the quantity you require and the automated system enables you to weigh out smaller quantities of samples or standards. You also minimize the operator's exposure to hazardous substances. And the best thing about it? No volumetric flasks or pipettes are required. In order to increase the throughput, it is possible to extend the XPR automatic balance with a sample changer. The XPR automatic balance with a sample changer is an ideal partner for filling small batches. This highly flexible setup enables you to dose up to 30 samples in one run. Manual weighing can be tedious, inefficient and error-prone. Weighing is an essential step of the analytical process and any inaccuracies produced during this stage will be carried downstream and affect the entire workflow. Take charge of your analytical processes with METTLER TOLEDO's XPR Automatic Balance. Different size containers as well as capsules and vials can be filled quickly and automatically. Not only you benefit from highly accurate, reproducible, fast and safe dispensing, but you have more time available to focus on other critical tasks. Thanks to the innovative design, you can use the XPR Automatic Balance for automated and manual weighing Manual weighing can be tedious, inefficient and error-prone. Weighing is an essential step of the analytical process and any inaccuracies produced during this stage will be carried downstream and affect the entire workflow. Take charge of your analytical processes with METTLER TOLEDO's XPR Automatic Balance. 50% less out-of-specification errors, maximum user safety, high accuracy and low milligram levels, precise concentrations down to 0.1 mg/g, achieving a dilution factor of 10,000 in one step, unattended filling of up to 30 containers in one run. Click the link below to find out how to achieve a fast ROI using automated weighing: https://www.mt.com/us/en/home/products/laboratory-weighing-solutions/analytical/excellence/xpr-automatic-balance.html?cmp=smo_GLO_YT_LAB_OTH_Youtube_LAB_GmExeB86OFk #METTLERTOLEDO #LaboratoryWeighing #XPRAutomaticBalance As you can see, our revolutionary solution, based on 75 years of Mettler Toledo weighing competence, covers even the most sophisticated weighing and dispensing needs. Invest in your future today.
XPR Automatic Balances by METTLER TOLEDO - Cutting Edge Balances
In this video, you will learn how automatic weighing of powders and liquids with the XPR Automatic Balance can support applications such as: sample and reference standard preparation, bottling and filling of powders or capsule filling.
Chromatography is a technique commonly used in analytical R&D and QC labs to separate, identify, and quantify the individual components of a sample mixture. Chromatographic methods use reference substances with exact concentrations in order to verify and quantify each component. The result of the chromatographic analysis is presented as a graph with a series of peaks that correspond to the various components in the sample. The area under each peak indicates the quantity of the The type of each component is verified against graphs of the reference substances. The XPR automatic balance offers options for the automatic dispensing of both powders and liquids, enabling you to prepare highly accurate standards for HPLC analyses. Not only is gravimetric standard preparation more accurate and reliable than volumetric methods, but you can prepare just the small amount of solution you require for your HPLC analysis. You don't need to align with the larger volume Preparation of reference standards and samples is a critical starting point for many analyses in pharmaceutical, food, chemical, or other sectors. Any error introduced during this stage will be carried downstream and affect the entire analytical process. METTLER TOLEDO's XPR Automatic Balance offers options for automated dispensing of both powders and liquids, enabling you to prepare highly accurate standards for HPLC. Not only it is more efficient, but also allows you to prepare the exact amount of the standard required and run reference standard preparation with ease. With automated powder and liquid dispensing you can: Ensure accurate and efficient preparation of standards Save up to 75% usage of substances Increase productivity See a quick ROI, oftentimes in less than 1 year. For more information, click the link below: https://www.mt.com/global/en/home/library/applications/laboratory-weighing/hplc.html?cmp=smo_GLO_YT_LAB_OTH_Youtube_LAB_lTVHlaBxLfU #METTLERTOLEDO #LaboratoryWeighing #XPRAutomaticBalance The XPR automatic balance will then accurately dispense the solid substance automatically. Simply switch to a liquid dosing head to add your solvent. The balance automatically calculates how much solvent needs to be added to achieve the required concentration. Preparation of reference standards and samples is a critical starting point for many analyses in pharmaceutical, food, chemical, or other sectors. Any error introduced during this stage will be carried downstream and affect the entire analytical process. METTLER TOLEDO's XPR Automatic Balance offers options for automated dispensing of both powders and liquids, enabling you to prepare highly accurate standards for HPLC. Not only it is more efficient, but also allows you to prepare the exact amount of the standard required and run reference standard preparation with ease. With automated powder and liquid dispensing you can: Ensure accurate and efficient preparation of standards, Save up to 75% of the cost of your substances, Enjoy increased productivity by preparing reference standards up to 70% faster, And even if you prepare just one reference standard per day, the whole system pays for itself in less than one year.
Automated Standard Preparation for HPLC - Benefits & Advantages
The XPR Automatic Balance enables you to prepare highly accurate standards for HPLC. Not only it is more efficient, but also allows you to prepare the exact concentration and amount of the solution required.
You are what you eat. So what if your food contains pesticides? What effect would it have on your body? Would you still be healthy? How can we ensure pesticide levels stay within safe limits? By pesticide residue testing. Pesticides are toxic compounds that protect crops. By killing insects, rodents, fungi and weeds. But pesticides pose a risk to the health of end consumers if residue levels are too high. Food safety regulations require food and animal feed to be rigorously tested. The maximum residue limit is the highest amount of an individual pesticide that is permitted to be present. Pesticide residues are identified and quantified by comparing the sample extract to a calibration standard solution and analyzing them by liquid or gas chromatography coupled with mass spectroscopy. To prepare such calibration standard solutions, high purity pesticide reference standards are used to create stock solutions, which are then diluted and combined according to the required analysis. Mettler Toledo's liquid dispensing module makes it possible to prepare highly accurate solutions. Simply select the required method from the home screen and follow the step-by-step instructions. LabX uses the parameters in your SOP, including target weight and concentration, as well as the purity of the reference standard from your database to ensure you get precise concentrations. Weight the approximate amount of reference standard within the predefined range directly into the large vial. LabX uses the actual weight recorded by the balance and the purity of the reference standard to calculate the precise amount of solvent required to reach the target concentration. The liquid dispensing module automatically dispenses the solvent directly into the target container. Very small quantities can be prepared, so less material is required. In the background, LabX handles all your data and calculations automatically, ensuring full traceability. You get the perfect concentration every time. Make the shift to preparing solutions gravimetrically with Mettler Toledo and benefit from highly accurate concentrations, increased throughput with fast turnaround times, and fully traceable results.
Fast and Efficient Pesticide Residue Testing & Detection in Food
Analysis of pesticide residues requires preparation of extremely accurate solutions. See how XPR Automatic Balance allows you to improve efficiency, accuracy and reduce the amount of substance used.
Did you know that your cosmetics may contain toxic levels of metals and heavy metals in particular? How would you feel about unknowingly putting your baby's health in danger by using creams or lotions containing such toxic compounds? So how can we be sure that such impurities stay below safe limits? The answer is simple with trace metal analysis. Determining trace metal content can be critical for product development, in quality control and for ensuring regulatory compliance in a wide range of different products such as oils and lubricants, cosmetics and personal care products, medicines, soils and fertilizers, as well as in food and drinking water. Trace metal analysis by spectroscopy techniques requires preparation of reference standards with exact concentrations for each of the metals potentially present. This is a tedious and repetitive task. Make the switch to an automated gravimetric method with the XPR Automatic Balance, which offers fast, efficient, and safe automated liquid dispensing. The preparation of solutions with accurate concentrations is an essential starting point for many analyses. With the XPR Automatic Balance, you simply start a method on the balance terminal. Define the target volume and the concentration or dilution factor. Place the container in the weighing chamber. And pipette an aliquot of your concentrate. The XPR automatic balance automatically calculates the precise amount of solvent needed to achieve the target concentration and dispenses the liquid directly into your container, while you can use this time to perform other tasks. And when the dispensing is finished, simply press the icon to print a label with your results and other relevant information. Make the switch to automatic weighing today and enjoy accurate, fast and cost-efficient preparation of solutions.
Cost-Effective Trace Metal Analysis with Automatic Weighing
Eliminate manual processes of sample preparation with XPR Automatic Balance. Save preparation time, reduce errors, and minimize analysis costs.
Capsule filling is a common activity in preclinical and early clinical studies. The usual challenges include very tight deadlines, potentially toxic compounds, and, often, there's a limited amount of material available. The XPR automatic balance with a sample changer enables accurate, safe, and efficient dispensing into capsules in a fully automatic process. The system is intuitive and flexible, so no additional training is required. Simply place your empty capsules into the dedicated capsule holders. Put the entire rack onto the sample changer. Select the method on the balance terminal and define the required target weight. The XPR Automatic Balance automatically dispenses the exact amount of powder into every capsule, while you can use this time to perform other critical tasks. The unattended filling of up to 30 capsules saves time and significantly increases throughput, and all the data and metadata is automatically stored in a secure database, thanks to LabX software. For filling capsules, the XPR Automatic Balance and LabX software enable you to achieve the highest accuracy at low milligram levels. Fully supported by on-screen user guidance and automatic documentation, the efficient process reduces development time and the closed dosing provides maximum user safety.
Automated Capsule Filling with the XPR Automatic Balance
Automate your capsule filling processes with METTLER TOLEDO's XPR Automatic Balance and improve your productivity and lab safety.
Do you suffer from nightmarish thoughts of having to dispense powders over and over again? Are you tired of manually preparing calibration standards for HPLC? With the Chronect XPR robotic system, you can put your sample prep nightmares to rest. An automated workflow on the Chronect XPR looks like this. This unique system combines the advanced weighing and dispensing technology of the XPR automatic balance with a state-of-the-art six-axis robotic arm. Dispense with flexibility. The platform offers space to store up to 32 different powder dosing heads on the rack. The dispensing technology of the XPR automatic balance allows the dosing of powder samples down to 1 milligram with the highest accuracy. With the optional Chronect liquid modules, the required amount of solvent can be added automatically to prepare accurate concentrations. Up to six solvents can be installed on the platform. Optional integrated robotic systems can be added for further automated process steps such as capping, vortexing, etc. Using 1 mL vials in six 96-vial plates, the platform can prepare hundreds of powder formulations in one run. With the easy-to-use Chronos software, you can schedule multiple, multi-component formulations and maintain full control of processes, automated data recording, and traceability. Prepared samples can easily be taken into the next automation platform for further experimentation or analytics. CHRONECT XPR boosts the efficiency of your lab, maximizes your sample yield, and allows flexible dispensing while maintaining full control with automated data management and traceability. Move your laboratory's productivity to the next level.
CHRONECT XPR—Robotic Powder and Liquid Dispensing
In a fully automated process, the CHRONECT XPR robotic dispensing platform enables you to prepare up to 288 samples or solutions in just one run! This unique system combines the advanced weighing and dispensing technology of METTLER TOLEDO's XPR Automatic Balance with a state-of-the-art six-axis robotic arm and the easy-to-use CHRONOS software.
Discover the Accessories
Vial Adapters
A range of adapters allows dispensing into a variety of containers including vials, bottles, capsules, and tubes.
The adapters come in different diameters, allowing you to work with your vial of choice.
A customer from the pharmaceutical industry spent hours filling capsules manually every day for preclinical studies. Each capsule was filled by hand with a different amount of API. The weighing process was time-consuming, error-prone, and difficult.
After the preparation of the dosing head and the definition of the quantities per capsule in LabX™, 30 capsules are filled automatically. The results are impressive:
Operator time was reduced from ca. 75%
Sample waste was reduced to almost zero, saving tens of thousands of dollars in API costs
Increased accuracy of the preclinical study outcomes
Full audit compliance achieved with LabX
Increased operator safety with less API exposure
Increasing Precision of HPLC Measurements
A customer in the chemical industry was looking for process improvements in the production of reference materials for residue analysis with HPLC and GC. The formulation of dozens of dry powders for subsequent solution preparation and dilutions was time-consuming and frequent errors led to significant rework.
Today, the customer stores their reference materials in dosing heads. Using LabX™, the operator follows a simple workflow through the dispensing process of both powders and liquids.
Operator time and sample amounts were reduced by 75%
HPLC calibration curves reached the highest regression values
Download our guide about the potential sources of error during manual sample preparation for weighin...
Frequently Asked Questions
FAQ - Automatic Weighing
For which applications can I use automatic weighing?
Multiple applications in various industries can benefit from automatic weighing, such as bottling for sales, sample preparation, capsule filling, or screening. Automatic scales are widely used in industries, such as fine chemicals, pharmaceuticals, CROs, CDMOs, or testing labs.
What is an automatic weighing balance?
The automatic balance can automatically dispense powders and liquids with high accuracy, in addition to performing solution preparation and serial dilutions. It improves workflows of sample preparation in the lab for qualitative and quantitative analysis of various analytical techniques including HPLC, GC, ICP, and NMR.
How can I improve the efficiency of sample preparation?
An automatic balance greatly reduces time spent on sample preparation. To further increase efficiency, an automatic balance can be upgraded with a sample changer, which can prepare samples while the operator focuses on other tasks in the lab.
What is gravimetric sample preparation?
Gravimetric sample preparation is weighing a sample, either manually or using automation, and then delivering the required amount of solvent to achieve a desired concentration. The solvent amount is calculated based on the actual amount of sample weighed and measured by its weight rather than volumetrically.
What is the lowest amount I can weigh automatically?
METTLER TOLEDO automatic balances (XPR226DRQ and XPR106DUHQ) show reliable performance for target weights above 0.30 mg. At this weight, 93% of measurements did not deviate more than 20% from the target weight.
How much time and sample can I save using automatic weighing?
The exact savings can be counted using a return-on-investment calculator. It can vary depending on the task time when working manually and sample costs. Generally, approximately 75% can be saved on sample and time when preparing the samples automatically.
How can I safely weigh potentially hazardous samples?
An automatic scale is the perfect solution for weighing hazardous samples. The system can work with limited technician interaction and can be easily placed in a safety enclosure or glove box.
What are the tricks to improve capsule filling?
An automatic balance with a sample changer is a useful solution for filling small batches (up to a few hundred) of capsules. Every capsule can be filled with a different amount of samples if necessary. This automated solution includes a specially designed powder dosing head in order to avoid spillage, error, waste, and save time.
What is a typical safety factor recommended by USP for manual and automated weighing?
According to USP <1251>, for stable laboratory conditions and trained operators, a safety factor of 2 is recommended. For automated weighing (gravimetric dosing), a safety factor as low as 1.5 is recommended.
Request Quote or InfoGet a QuoteInstant QuoteSolution InformationRequest a Demo
I want to…
Need assistance? Our team is here to help you achieve your goals! Speak with our experts.