Wij ondersteunen en onderhouden uw meetapparatuur gedurende het gehele productleven, van installatie tot preventief onderhoud en van kalibratie tot reparatie.
Dissolved Oxygen Transmitters
Easy-to-Operate DO Transmitters for Process & Water
DO transmitters are analytical transmitters designed for continuous monitoring of dissolved oxygen in industrial process control and water monitoring. METTLER TOLEDO DO transmitters can be used with a wide range of oxygen sensors, including optical dissolved oxygen and polarographic dissolved oxygen. Many of these dissolved oxygen transmitters also offer multi-parameter functionality for greater flexibility in measurement.
Wis alleView Results ()
Filter ()
Voeg 1 of 2 andere producten toe om te vergelijken
Easy Operation with an Intuitive Touchscreen Display
METTLER TOLEDO DO transmitters provide a user-friendly interface with intuitive touchscreen capabilities to clearly display measurement information and sensor diagnostics for simple operation.
Dissolved Oxygen Transmitters for Harsh Environments
For environments where gloves are needed, select DO transmitters feature a robust design with a soft key interface and touchscreen display for reliable operation without compromising user ergonomics.
Predictive Diagnostics Visible on the DO Transmitter
To prevent unplanned analyzer downtime, METTLER TOLEDO DO transmitters' unique iMonitor utility uses real-time sensor performance information to anticipate sensor maintenance before issues arise.
Plug and Measure Calibration Features
Minimize installation risk by pre-calibrating sensors away from the process using iSense. Once connected to a DO transmitter, calibration data is instantly uploaded and the system is ready to measure.
Enhanced Process Reliability of In-line DO Transmitters
ISM technology provides real-time status information, simplified sensor handling, and enhanced process reliability for reduced maintenance and fewer unplanned shutdowns on all in-line DO meters.
Oxygen Transmitter with Multi-Parameter Functionality
Multi-parameter transmitters allow users to take multiple measurements from a single dissolved oxygen transmitter to help lower the cost per measurement point.
Multi-Channel DO Transmitters for Reliable Measurement
For ensured process reliability, METTLER TOLEDO multi-channel DO transmitters monitor multiple DO sensors with one dissolved oxygen transmitter when multiple measurements are needed.
Gerelateerde informatie
How to Select a Process Analytical Transmitter
Download the PRO Insight and find out how to select the right analytical transmitter for your process. Lees meer
Family Flyer of Intelligent Transmitter Series
METTLER TOLEDO provides tailorable transmitter solutions to meet the requirements of a wide range of applications. The transmitter series cover pH/ORP, oxygen, dissolved carbon dioxide and conductivity measurements. Lees meer
Analytical Transmitters Homepage
Multi-parameter transmitters for monitoring of key process and water analytical parameters such as pH, dissolved oxygen, conductivity and TOC. Lees meer
Safety Instructions M100 / M300 / M400 / M800 Transmitter Series
Download the list of general safety instructions and warnings for the M100 / M300 / M400 / M800 transmitter series. Lees meer
+32 3 250 15 70
Bel Service Ontdek onze services – geheel afgestemd op uw apparatuur
Uptime
Ondersteuning & Reparatie
Ondersteuning & Reparatie
Performance
Onderhoud & Optimalisatie
Onderhoud & Optimalisatie
Compliance
Kalibratie & Kwaliteit
Kalibratie & Kwaliteit
Expertise
Training & Consulting
Training & Consulting
FAQs
What is a DO transmitter?
Dissolved Oxygen (DO) transmitters are an integral component of an oxygen measurement system that communicates and displays DO sensor readings back to the user or to a higher-level control system.
What is dissolved oxygen?
Dissolved Oxygen is the level of non-compound oxygen found in water or other liquids. Proper oxygen levels are an important indicator of good water quality. When measured in-line, this value can be displayed on a dissolved oxygen transmitter, or sent to a control system for process control.
Can I measure multiple parameters simultaneously with a DO transmitter?
Yes, select METTLER TOLEDO dissolved oxygen transmitters measure multiple parameters at the same time. These multi-parameter DO transmitters are great for situations where multiple measurements needs to be taken without increasing the cost per measurement point. Using one transmitter for multiple parameters provides uncomplicated measurement for greater flexibility and less training.
How can I calibrate a DO sensor on my DO transmitter?
A dissolved oxygen transmitter offers step-by-step calibration and sensor adjustment instructions through its user-friendly interface. The DO transmitter will walk you through a process calibration, 1-point calibration or 2-point calibration on the screen of the dissolved oxygen transmitter.
How do I know I am choosing the right DO transmitter?
METTLER TOLEDO offers a range of dissolved oxygen transmitters for different needs and functions. When choosing the correct DO transmitter, consider your environment, how many parameters are being measured, if there are single or multi-channel requirements, and if communication to control systems and Intelligent Sensor Management (ISM) is necessary. METTLER TOLEDO recommends a discussion with a local sales representative to assess your needs and propose the right DO transmitter for your specific application.
What is ISM?
Intelligent Sensor Management (ISM) technology improves production processes through simplified sensor handling and enhanced process reliability. Advanced ISM capabilities, like iMonitor, help reduce maintenance and prevents unplanned shutdowns for a simplified operation on all dissolved oxygen transmitters. Plug and Measure features on DO transmitters simplify measurement point start up through the pre-calibration of DO sensors away from the DO transmitter and the process.