O2 Sensor InPro6900iG/12/120/Ka
Št. Izdelka: 52206439
Specifikacije
Specifikacije - O2 Sensor InPro6900iG/12/120/Ka
| Parametri merjenja | Kisik v plinasti fazi |
| Merilna tehnologija | Amperometrična elektroda Clark |
| Razpon merjenja (2) | 50 ppm - 60 V-% O2 |
| Natančnost | ≤ ± [1 % +50 ppm] |
| Odzivni čas | T90 ≤ 20 s (dušik do 15 Vol-% O2 pri 25 °C/77 °F) |
| Primarni medij/uporaba | Kemični procesi Proizvodnja v farmacevtiki/biološki znanosti |
| ISM (digitalno) ali analogno | ISM (digitalno) |
| Kabelski priključek | K8S |
| Dolžina senzorja | 120 mm |
| Procesna povezava | Pg 13.5 |
| Oblika priključka | Raven |
| O-Ring materijal | Kalrez® |
| Premer senzorja | 12 mm |
| Grobost površine navlaženih delov | N5/Ra 16 (Ra = 0,4 mm/16 min) |
| Namočeni materiali | 316L nerjaveče jeklo |
| Material navlažene membrane | PTFE |
| Družina modelov | InPro6900iG |
| Meja detekcije | 50 ppm |
| Meja zaznavanja | 50 ppm |
| Signal senzorja v zraku pri 25 °C (77 °F) | 250...500 nA |
| Rezidualni signal v medijih brez kisika | < 0,03 % signala v okoliškem zraku |
| Izravnava temperature | Samodejna |
| Temp. območje merjenja | 0 °C – 70 °C |
| Delovni tlak (v bar) | 0,200 bara–9,000 bara |
| Območje mehanske temp. | -5 °C – 121 °C |
| Tlak po zasnovi (bar) | največ 12 barov |
| Tlak po zasnovi (PSI) | največ 174 psi absolutno |
| Odobritve za uporabo na nevarnih območjih | ATEX: Ex ia IIC T6 / T5 / T4 / T3 Ga / Gb, Ex ia IIIC T69 °C / T81 °C / T109 °C / T161 °C Da / Db. FM: IS Cl. I, II, III, Div 1, GR ABCDEFG / T6 * |
| Odobritve za higieno/biološko združljivost | EHEDG, FDA/USP razred VI |
| Drugi certifikati | Certifikat kakovosti, certifikat materialov METTLER TOLEDO 3.1, N5/Ra 16 |
| -5 °C – 121 °C | |
| Operativno područje | 50 ppm - 60 V-% O2 |
| Povezava | K8S ISM |
| Izmerjeni upor tlaka | 0,2 bar – 9 bar |
| 23 °F – 250 °F |
KALREZ is a registered trademark of E. I. Du Pont de Nemours and Company Corporation
Features and Benefits
| Accurate at Low Oxygen Concentrations The InPro 6900iG/12/120/Ka offers reliable measurement between 0.1% and 60% oxygen, at an accuracy of 50 ppm. This makes it suitable for applications that need measurement at a low ppm level and require high operational availability. |
| Suited to Your Process Needs To meet the requirements of your specific application, the InPro 6900iG/12/120/Ka is 120 mm long for short to medium length installations. It uses a Kalrez® O-ring with 316L stainless steel wetted parts for wide application coverage. |
| Fast Sensor Replacement for More Uptime The InPro 6900iG/12/120/Ka offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process. |
| Plan Maintenance with ISM Diagnostics ISM technology in the InPro 6900iG/12/120/Ka monitors sensor stress to provide a prediction for upcoming calibration needs. It also tracks electrolyte level to identify evaporation and leakage, and informs you when refilling is required. |
Dokumentacija
Dodatki
Kalibracija senzorjev in orodja za vzdrževanje
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Št. Izdelka: 52300383
