Povezani izdelki in rešitve
IND331 Procesno tehtanje
The IND131xx Junction Box scale terminal features an IND131xx DIN unit and a load cell summing board mounted in a robust stainless steel enclosure. Th...
Weighing Terminal IND131 - izdelek ni več v prodaji
Tehtanje-Skladnost-Nadzorovanje-Povezljivost.
Izbira ohišij
Uporabite DIN-letev z enojno analogno tehtalno celico ali pa uporabite različico s priključno omarico na povprečno štiri analogne tehtalne celice
Možnost varnostnega kopiranja in obnovitve
Pomnilniška kartica SD omogoča enostavno varnostno kopiranje in obnovitev podatkov namestitve, hkrati pa je praktično prenosljiva.
Umerjanje s PLC
Za odpravo napak operaterja lahko izbirate med tradicionalnimi metodami umerjanja CalFREE™ ali novo funkcijo umerjanja s PLC.
Št. Izdelka: 64087994
Izdelka ne izdelujemo več od: Feb, 2022
Dokumentacija - Weighing Terminal IND131
Dodatki - Weighing Terminal IND131
Standard Features and Benefits - Weighing Terminal IND131
- Support for analog scale bases
- DC (External) power supply
- Broad connectivity options
- Serial - RS-232 (standard) and RS-232/485 with support for Modbus RTU protocol (optional)
- PLC – Analog Output / A-B RIO™ / Ethernet/IP™ / Modbus® TCP / PROFIBUS® DP / DeviceNet™, ControlNet™
- Discrete Inputs/Outputs
- 2 Inputs /4 Outputs
- Solid state -- open collector type
- Optimum target control
- Single-latched or coincidence target
- Three coincidence comparators
- Internal rate calculation assignable to comparators
- Enhanced performance for process applications
- Ultra-fast A/D conversion (366 Hz), target comparison (50 Hz) and PLC update (20 Hz) rates
- Patented TraxDSP™ digital filtering
- Display resolution 100,000d (max)
- Enhanced productivity and efficiency
- SD memory card
- Backup and restore for setup and calibration
- Portability of setup to other terminals
- Calibration choices
- Scale calibration though PLC
- Step calibration
- CalFREE® -Calibration without test weights
- Traditional
- Service friendly
- Modular design assures ease of service and multiple mounting possibilities
- Diagnostic LEDs and error codes for easy troubleshooting
- TraxEMT™ performance monitoring and recording for easy operational audit
- Serial and Discrete I/O tests
- Weights and Measures Approvals
- NTEP, Class III/IIIL 10,000d Coc 09-051
- OIML, Class III 6,000e (R76/2006-NL 1-09.26)
- MID, OIML R51/R61
- Canada Class III/IIIHD n max. 10000/20000
Hazardous Area Approvals
USA - FM: NI / I, II, III / 2 / ABCDEFG /, T5 Ta = 40°C, I / 2 / IIC / T5 Ta = 40°
Canada - FM: NI / I / 2 / ABCD / T5 Ta, = 40°C, DIP / II, III / 2 / EFG / T5 Ta = 40°C
ATEX: II 3 G Ex nA nL [nL] IIC T5, II 3 D Ex tD A22 IP 65 T, 100°C
IECEx: Ex nA nL [nL] IIC T5, Ex tD A22 IP65 T100°C
NEPSI: Pending