Today’s pharmaceutical landscape demands rigorous data integrity and streamlined workflows—especially for critical therapies that prevent post-chemotherapy infections. In this spotlight, we explore how a global pharma site in Australia modernized its UV/Vis spectroscopy operations to align with tighter regulations. Leveraging METTLER TOLEDO’s UV7 Excellence Spectrophotometer and LabX™ software, the lab adopted a secure, automated system that reduces human error, simplifies SOPs, and ensures every measurement meets demanding compliance standards.
![]() |
To je poudarek zgodbe o uspehu, kjer vam ponudimo vpogled v navdihujoče projekte strank, da bi podprli preobrazbo vašega laboratorija. Torej je platforma LabX, ko deluje v okolju 21 CFR Part 11, kar je kodeks FDA, evropski kodeksi, Priloga 11 PIC/S, nekakšna shema za farmacevtsko delovanje. Torej, ko programsko opremo LabX uporabljate v načinu skladnosti, se vse sledi. Za vse so torej elektronski podpisi. Ljudi lahko onemogočite pri stvareh, za katere niso usposobljeni. Metod ne morete validirati. Metode lahko sprostite določenim. Določenim ljudem po usposabljanju; s tem so povezani vsi ti podatki 21, temu se reče integriteta podatkov. LabX ima to torej v ozadju. Lahko vključite ali izklopite. V nefarmacevtskem svetu to pustite izklopljeno. Je frustrirajoče, izčrpava vas že samo nastavljanje. Vsa programska oprema je takšna. Ko imate delujočo validirano skladnost, je fantastično, ker lahko počnete le to, kar vam je dovoljeno, kar je validirano in kar. kar ste usposobljeni za početi, in ko smo ustanovili Pharmalytics, smo sodelovali s podjetji, in sicer z Agilent Technologies za vso kromatografsko opremo in z Labix za vse ostalo, tako da Kupili smo tehtnice, viskoznostne, titratorje, power fisher, pH, prevodnost, gostoto pri UV. Deluje na eni programski platformi. Torej je to fantastično. ena platforma za validacijo. To je vse. Da, vse to je treba validirati. To je del težav, skozi katere morate iti. Toda glede zajema podatkov v podatkovni zbirki moram validirati le eno platformo. Zdaj pa, če bi teh sedem ali osem stvari kupil od osmih različnih ponudnikov, mm-hmm. Moral bi zagnati osem strežnikov, validirati osem platform, imeti usposabljanje na osmih platformah, vsa vzdrževanja, nego. V tem prostoru preprosto ni druge možnosti, ki bi to ponujala. In želel bi si, da bi imeli več instrumentov. Najprej je to navada Metlerja. V redu, ni jim treba kupovati pri nekom drugem. Torej nam gre kar dobro. Za celoten laboratorij imamo pet podatkovnih zbirk. Ena od njih je LIMS. Ena je Agilent. ena je Metla, tako da sta samo še dve drugi, zato je to dobro, predvsem pa zato, ker imajo Adjuvant ogromno paleto kromatografske opreme, ki deluje z njihovo, potem pa smo izbrali Metlo, ogromno paleto vsega drugega, kar deluje s tem; to ni popolno, je pa blizu, zelo blizu, res je dobro
Today’s pharmaceutical regulatory environment is exceptionally demanding. Whether the focus is on oncology support drugs or infectious disease therapies, QC must be comprehensive. In Australia, a branch of a global pharma leader was producing a medication aimed at lowering infection risk post-chemotherapy. The process required UV/Vis spectroscopy within a strictly documented framework
However, changing regulations exposed gaps in their setup: they lacked workflow security, thorough documentation, and guaranteed measurement accuracy. Realizing that manually maintaining multiple SOPs would risk errors and non-compliance, the QC manager sought a single, fully validated solution. They chose METTLER TOLEDO’s UV7 Excellence Spectrophotometer—aligned with the latest United States Pharmacopeia (USP) updates—and LabX™ software to address these needs.
Building a Secure UV/Vis Workflow
![]() |
Figure 1: METTLER TOLEDO's performance verification modules can remain mounted on a UV7 Excellence Spectrophotometer during sample measurements. |
This combined system enabled the QC team to surpass existing SOP requirements for sample preparation, absorbance measurements, and traceability. Thanks to step-by-step prompts on the instrument’s terminal, operators could follow each protocol precisely, minimizing the possibility of missteps. This daily guidance not only upheld compliance but also instilled confidence in the staff that every sample was handled with consistent rigor.
Instrument Performance, Compliance, and Traceability
METTLER TOLEDO’s UV7 Excellence Spectrophotometer and LabX™ software work in tandem to ensure data integrity and high performance:
- CertiRef™ and LinSet™ Performance Verification Modules: Automate optical checks, in line with the 43rd edition of the USP, allowing the lab to confirm up to 10 optical parameters with certified references.
- Single-Workstation Control: One PC running LabX software can govern two spectrophotometers, standardizing workflows and easing instrument management.
- Real-Time Prompts: Operators are guided through tasks such as sample insertion, measurement selection, and result logging, significantly reducing user errors.
Mounting the Modules
- The UV7 covers are removed from the spectrophotometer.
- The CertiRef™ and LinSet™ modules are easily attached, remaining in place during routine measurements.
Integrated Equipment, Software, and Workflows
The Australian lab quickly discovered that when it comes to dilution, absorbance measurements, and data security, METTLER TOLEDO’s UV7 Excellence Spectrophotometer paired with LabX software is a robust choice for modern pharma environments. Complex SOPs become more manageable under a unified platform, ensuring comprehensive audit trails and regulatory compliance. From basic QC checks to highly specialized testing, the system delivers consistency, reliability, and the flexibility to adapt to evolving standards.
In short, this integrated approach simplified day-to-day operations and minimized the risk of non-compliance—essential when patients’ health depends on accurate, reproducible results. QC managers now have confidence that each step meets the toughest demands, from sample preparation through to final documentation and data storage.
![]() |
Anika Adams is Senior Product Manager for UV/Vis Spectrophotometers at METTLER TOLEDO, where she focuses on driving innovation and optimizing customer workflows.
With a degree in business administration and experience spanning software development, mechanical engineering, and production, Anika brings a multidisciplinary perspective to the laboratory business. Her expertise lies in automating and enhancing customer processes, ensuring both product excellence and customer satisfaction.









