We support and service your measurement equipment through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
Single-use pH sensors are designed to be securely installed into single-use bioreactors and other devices. METTLER TOLEDO single-use pH sensors are factory calibrated and gamma sterilizable sensors for integration into single-use processes for biopharmaceutical manufacturing. These single-use pH sensors are designed to ensure a significantly longer shelf life for up- and downstream devices, while offering an output signal identical to that of a reusable sensor for efficient process integration.
This video introduces the single-use pH sensor InSUS 310 for bioreactors. The single-use pH sensor is designed for direct integration into single-use bioreactor bags. It meets the challenges of the modern bioprocessing environment. The single-use pH sensor provides a reliable measurement signal for at least six weeks, making it optimal for long batch processes.
These single-use pH sensors are factory calibrated by METTLER TOLEDO to ensure that they are accurate and ready to measure in single-use bioprocess devices.
With a shelf-life of 30 months, these single-use pH sensors enable enhanced equipment inventory control at the process device manufacturer and at end-user sites.
To ensure bag protection during transport and preparation, these single-use pH sensors have round-edged protective guards to prevent damage to the electrode inside of the bag.
These single-use pH probes can be used throughout a broad range of applications, including cell culture, harvesting, fermentation, media/buffer preparation, virus inactivation and purification steps.
All wetted polymer materials used on single-use pH sensors are made of USP 88 VI certified materials to ensure the highest process safety to meet biocompatibility requirements.
Single-use pH sensors from METTLER TOLEDO offer a unified design that allows safe and easy installation in a standard 1" Eldon James port disc, making them ideal for welding to bag stock.
The output signal of these single-use pH probes is identical to that of METTLER TOLEDO reusable pH probes, to allow easy integration into existing transmitters and process environments.
Single-use pH sensors are sensors for pH measurement that are designed to be integrated into single-use process devices by the device manufacturer.Single-use pH sensors from METTLER TOLEDO measure pH with a potentiometric single-use sensor which has been factory calibrated by METTLER TOLEDO in common buffer solutions (zero point and slope). These disposable pH sensors can be used in a broad range of applications that require single-use bags including cell culture, harvesting, fermentation, media/buffer preparation, virus inactivation and purification steps. With their robust design for enhanced protection, METTLER TOLEDO single-use pH probes ensure a significantly longer shelf life while offering an output signal identical to that of a reusable sensor for highly efficient integration. All wetted polymer materials are made of USP 88 VI certified materials.
Single-use pH sensors are directly integrated into the single-use process device by the device supplier and cannot be taken out and replaced. The complete SUB assembly with the single-use pH sensor is gamma irradiated and is shipped pre-sterilized to the biopharmaceutical producer. Consequently, integrated single-use pH sensors will never be removed from the reactor, will never be autoclaved, and will never be calibrated outside the single-use bioreactor with buffer solutions.
The InSUS 310 by METTLER TOLEDO is a single-use pH sensor designed for integration into single-use bioprocess devices. This single-use pH probe has been factory calibrated by the sensor manufacturer in common buffer solutions (zero point and slope) to provide the most reliable pH measurements. The shelf life is 30 months dry storage and the disposable pH sensor is made of USP 88 VI certified materials to ensure the highest process safety.
METTLER TOLEDO sells single-use sensors directly to bioprocess equipment manufacturers for integration into their single-use devices. These sensors are not directly sold to end users. If you are interested in single-use pH sensors or single-use dissolved oxygen sensors for your manufacturing operation, contact your bioprocess device manufacturer and ask them for METTLER TOLEDO InSUS single-use sensors.