View and Measure Particles In Situ and in Real Time
EasyViewer™ is a probe-based video microscope that continuously captures high-resolution images of particles, crystals, and droplets under a wide range of process conditions without sampling or offline analysis.
When relevant images are captured and automatically combined with trends sensitive to changes in particle size and concentration, scientists and engineers can rapidly and intuitively characterize particle mechanisms, ensuring a comprehensive understanding is acquired with every experiment.
Now with a single probe, everyone can leverage real-time particle insights to improve yield, purity, filtration rates, and product quality faster than ever before.
Please describe your project. /content/sg/en/home/products/L1_AutochemProducts/particle-size-analyzers/easyviewer.fb.1.c.11.html
Easy Viewer provides an immediate understanding of particles as they naturally exist in process with submicron resolution. Easy Viewer's turbidity trend is highly sensitive to system changes and real-time image analysis measures particle size to track growth and shape changes that are impossible with offline techniques. Auto focus, auto lighting, and say best image algorithms capture crisp, high resolution images, ensuring confidence in data quality while working remotely. Image analysis automatically detects unexpected events. This allows scientists to quickly adjust parameters to avoid conditions that lead to downstream impurities, filtration problems, or other scale-up risks. With the assistance of experimental images, data analysis is immediate, intuitive and conclusive. Once the process is well understood at a small scale, the choice of probes enables confident scale -up from 10 milliliter to pilot scale. Easy Viewer helps researchers take control of particles to improve process performance and product quality.
View and measure particles in situ and in real time.
Obtain deep process understanding of complex systems in volumes as low as 15 mL. Study crystallizations, suspensions, and emulsions in previously unobtainable detail and reveal new insights that power process development.
Collect the highest quality images and process trends with just three clicks. Complete data capture and unattended operation to study particles as they naturally exist in process.
Please describe your project.
Please describe your project.
High-Resolution Images and Intuitive Image Analysis
High-Resolution Imaging
Stunning images allow scientists to visualize the effect that process parameters, such as temperature cycling, have on particle size and shape in real time.
New Experimental Insights
Everyone can capture outstanding microscope quality images without sampling or dilution, even from thick slurries.
Identify Process Risks
Researchers can easily identify oiling out and avoid the conditions that lead to this process risk, thereby improving purity and quality.
Powerful Image Analysis
Image analysis turns EasyViewer into a powerful tool for monitoring and understanding how complex particle processes unfold.
The highly sensitive turbidity trend provides an overview of the process, helping to quickly identify key points in the experiment.
The size, shape, and count information provided by Image2Chords™ enables scientists and engineers to uncover and quantify the impact process parameters have on complex particle mechanisms.
Convert Images to High-Quality Data
The Image2Chords module simplifies particle process development by providing real-time particle size, shape, and count information. Image2Chords converts images to high-quality chord length distributions (CLDs) and provides the results as trends and statistics that can be used to confidently characterize particle mechanisms, including nucleation, growth, dissolution, breakage, and morphology changes. This real-time information allows scientists and engineers to study particles as they naturally exist within the need for complex or slow offline testing.
Image to cords revolutionizes how scientists and engineers understand and characterize complex particle systems in real time. EasyViewer with IC Vision captures high resolution images and image to cords transforms them into actionable particle size and count data. This combination of in situ images and particle size and count information makes EasyViewer and image to cords vital tools in accelerating particle process development. EasyViewer is inserted directly into process streams or vessels at an angle to ensure particles can flow easily across the probe window where lasers provide illumination. As particles flow past the window, high-speed images are collected and the backscattered light in each image pixel raster row is analyzed to identify the start and end point of each particle. Then the distance between the two points is used to calculate the chord length. By performing this measurement thousands of times per image, Image to Chords provides a statistically robust and highly sensitive fingerprint of particle size and count as they naturally exist in the process. Visualizing how the particle populations evolve over time is simple, intuitive, and straightforward using IC Vision. Chord length distributions from time points throughout an experiment can be quickly compared to uncover particle mechanisms and visually confirmed with the corresponding in-situ images. The chord length distribution changes can be used to track how particle size and counts evolve from the beginning until the end of a process. Statistics from each chord length distribution, such as counts in fine and coarse size classes, can be trended over time. By providing in-process size distributions and trends, scientists and engineers can target specific particle attributes and confidently take control of particles to improve product quality and process performance. With image-to-cords, researchers gain the ability to make faster and better informed decisions. Real-time process insights derived from every experiment using a single in situ probe revolutionize how particle systems are studied and optimized. To learn more, go to mt.com slash easyviewer.
Enhanced Process Insights with Advanced Image Analysis Algorithms
iC Vision™ software integrates cutting-edge Experimental Image Analysis (Exp. IA) algorithms, facilitating rapid development and deployment of particle detection and characterization models. Exp. IA is precisely tuned to identify and size bubbles and droplets, critical for monitoring polymerization and emulsion reactions, and incorporates advanced detection of oiling out phenomena to enable proactive process control.
Fully Automated for Unattended Operation
EasyViewer and the powerful iC Vision™ software utilize innovative auto-focus, auto-lighting, and auto-save best image features so you never miss capturing crisp, high-resolution images of important events — even when working remotely.
Image analysis simplifies data interpretation by automatically detecting undesired events, such as droplet formation, that could reduce product purity.
Ensure Safe, Robust, and Scalable Processes
OptiMax lab reactor systems are designed to ensure safe, robust, and scalable processes. Researchers can characterize and optimize chemical reactions on the liter scale before going to manufacturing. OptiMax chemical reactors are applied for go/no-go safety considerations when scaling up by identifying enthalpy, heat capacity, as well as heat and mass transfer under process-like conditions. OptiMax synthesis reactors are widely applied when engineering particles by crystallization with particle size analyzers.
Designed with Ease-Of-Use in Mind
The slim EasyViewer probe has no field unit and requires no utilities, making installation into vessels easier than ever before.
Simple plug-and-play USB connection combined with streamlined iC Vision™ software allows anyone to pick up EasyViewer and within minutes, capture stunning images of particles as they naturally exist in-process, without sampling or dilution — even in high-concentration slurries.
From Early-To-Late Stage Development
A choice of probe sizes enables confident deployment in any size reactor 15 mL and up.
EasyViewer 100 – Lightweight and slim probe, ideal for early development when limited sample volumes and process unknowns are high.
EasyViewer 400 – Longer probe and optimized depth of field provide unmatched images for advanced particle engineering in larger reactors.
EasyViewer 100
Slim and lightweight probe with plug-and-play connection and smart software makes setup and automated data capture effortless.
For use in: Laboratory
Imaging system: Backscattered images
Probe diameter: 9.5 mm
Probe wetted length: 199 mm
Field of view: 1000 μm x 1000 μm
Optical resolution: > 1.5 μm
EasyViewer 400
Compare results from small scale to larger scale during transfer to de-risk late stage process development.
For use in: Lab or Non-Hazardous Plant
Imaging system: Backscattered or transmission images with optional use of clamp-on reflector
Probe diameter: 19 mm
Probe wetted length: 400 mm
Field of view: 1100 μm x 800 μm (± 50 μm)
Optical resolution: > 980 nm
The Ultimate Particle Engineering Workstation
The Ultimate Particle Engineering Workstation
Understand precisely how process parameters impact concentration, size, shape, and structure to make better decisions, eliminate process risks, and solve problems—faster.
Please describe your project. /content/sg/en/home/products/L1_AutochemProducts/particle-size-analyzers/easyviewer.fb.1.c.11.html
ReactRaman – A compact, high-performance Raman spectrometer provides critical insight for even the most challenging reactions, including crystallization processes, polymorphism detection, and multiphasic reactions
ReactIR – A user-friendly in-situ FTIR spectrometer enables scientists to measure reaction trends and profiles in real time, providing precise information about supersaturation, reaction kinetics, mechanisms, and pathways
ParticleTrack with FBRM™ technology– The industry-standard, particle size analyzer used to measure the influence of process parameters on particle properties, including size, shape, and count
Understand precisely how process parameters impact concentration, size, shape, and structure to make better decisions, eliminate process risks and solve problems — faster.
Hello, this is Dez O'Grady, one of Mettler Toledo's crystallization subject matter experts. I wanted to take this opportunity to provide you with a brief update on our Take Control of Particles initiative and introduce the concept of a particle engineering workstation which can help solve some of the key challenges and problems around particle engineering and crystallization. Crystallization, as many of you know, is a unit operation which can isolate and purify product in a very convenient way. Obtaining the correct crystal size and shape distribution in the crystallizer can help mitigate potential issues that happen downstream during, for example, filtration, drying, transportation and product formulation. Some of the kind of challenges that you see at different parts of this process include include product decomposition on a filter because perhaps it takes too long for the filtration to take place maybe as a result of too many fine particles or for example difficulty transporting material because of issues with flow ability related to particle shape so getting things right in the crystallizer really helps optimize the downstream operations Some of the key challenges associated with crystallization and particle engineering are kind of illustrated in these two quotations that I pulled from two really nice papers on the topic of crystallization. So from the first paper, which is actually a continuous crystallization publication from Eli Lilly, one of the quotations pulled out for this project that they were working on was particle sizes greater than 200 microns could limit absorption, so bioavailability. Essentially, the crystallization therefore needed to provide non-agglomerated crystals with a small aspect ratio and a size less than 200 microns. So small crystal size was important to ensure that the product would work well. If you look at the second paper on a different project, it says in most cases, however, fine particles are not desired since they can be very difficult to handle in downstream processing, notably filtration, washing and drying. So kind of what this summarizes here and neatly illustrates is that obtaining an effective product and getting a good efficient process can actually be a competing objective and this makes particle engineering design quite a challenge. Some considerations to think about in terms of particle engineering, I like to think in terms of this workflow where you have certain process parameters which, you know, as a scientist you can change or try and optimize. So, for example, the type of solvent you're using, the mixing regime that you employ, maybe the pH or the addition rate of an antisolvent or something as simple as the cooling rate that you choose. And depending on this combination of different choices, you can get different transformations. occurring during the crystallization process so maybe you favor growth over nucleation maybe for example if the mixing rate is too high you get too much breakage or if the pH is you know off for some reason you get a lot of agglomeration so the process parameters impact these transformations and then depending on the transformations you get then you end up with potentially a different result a result both in terms of the product that you get the particle size shape the purity the yield for example example, but also the process ability of the particles that you generate. Are they going to be easy to filter? Will they flow? Are they straightforward to formulate? So this workflow is really important to consider when designing particles is to consider the parameters that you choose, the transformations that occur, and the end result that you're going to get. Now traditionally the way to do this was to take a offline sample and to characterize the particles at a specific point in time after sampling and preparation. So you can see a typical workflow here around taking a sample, a really good method development is required to do this well to make sure that you don't change crystals for example, but typically you take a sample, filter it, maybe dry it, prepare it in some way and then do the analysis to get your result. This is really important for regulatory compliance, it's a very standard method to demonstrate control over the process, helps you set specifications and it can also give you nice understanding of what's happening as a snapshot at a specific point in time. So this is kind of the offline particle characterization approach. However, if we think back to this concept of this workflow going from parameters to transformations to result, the offline sample really only gives you information about the result. And what we try and do in MATLAB Toledo is to provide tools for particle engineering that actually provide information about the process parameters that you have to optimize, but then also the transformations that are occurring in a crystallization process, for example. So we provide information. Around the process parameters we enable you to control and record them, but then also to monitor the solid phase, the particles themselves, and the liquid phase in a crystallization process. And the combination of this information together can provide a really useful process understanding that help scientists get the result that they need at the end of the day and the result that will generate a good product and also an efficient process. So this is really our purpose is to deliver. These tools for particle engineering which help control and record the process parameters and then provide in situ real-time analysis of solid and liquid phases in a crystallization process for example. So very quick, this is what this combination of products might look like packaged together in the toolbox or a particle engineering workstation. You can see real-time microscopy images here where we're actually seeing a seed crystallisation process that grows and agglomerates and then actually we see dendritic growth and it breaks apart and you see secondary nucleation, so very complicated mechanisms that we're visualising and then we can also quantify these mechanisms. mechanisms by tracking the particle size, the particle count in real time with the particle track instrument and this is all combined in one package along with the process parameters, in this case temperature. So you can see when the temperature drops in this example, the particle count goes up right around when that secondary nucleation event occurs. So this is a very quick brief overview of how a typical particle engineering toolbox or workstation might work. And one of the ways we look at this is it's not enough just to provide the data, what we try and do is really provide a holistic solution and this kind of comprises a few different things. So first of all these tools have to be walk-up tools that every scientist can use to be successful. We try and engineer our reactors so that they are designed to match larger scales, hopefully making scale -up decisions a little bit easier. We have very powerful data analysis tools with our IC software. software platform and then also data management solutions. One thing that happens when you implement this approach is you start generating more data and it's very important to be able to manage that data so that you can extract useful information. So we have data management solutions around IC Data Center to really help with this also. So this is the complete solution packaged together, very easy to use, walk-up tools, simple and straightforward but powerful software. as well so what does all this mean at the end of the day so we hope with these particle engineering workstations our customers can really kind of focus on four things the first is Being able to design good particles. So particle design. So to be able to design particles with the desired physical attributes, specifically with the appropriate particle size and shape. Fast troubleshooting is also important. So we hope we enable scientists to obtain evidence that can identify the root cause of issues or failures. We have good examples in our citation lists, which I'll show in the next and final slide where our tools are actually used to document process understanding. and demonstrate process control which is very useful for regulatory acceptance and then finally predictable manufacturing so using the data that's generated in the lab combined with data that might be collected in a kilo lab or a pilot plant or a manufacturing to ensure that you get confidence scale up and good manufacturing capabilities when you when you finally get to a full production scale So very quickly I just like to point people to a citation list which might be interesting to check out there's many different applications of the particle engineering workstation throughout the development cycle for crystallization processes we listed some here so super saturation monitoring looking at oiling out or phase separation scale up continuous all this good stuff and this citation list along with a lot more reference material can actually be Maybe you found that that website that I point to here. So it's www.mt .com forward slash AC dash control particles. So if you're interested in learning more about what other users are doing in industry and academia using this particle engineering workstation, there's about 40 or 50 quite recent references here on this website that I think would be quite interesting for people to check out. Thanks.
Case Studies from Industry
Leverage PAT and Automation to Expedite Crystallization Process Development
Applying Modeling & Feedback Control to Batch and Continuous Crystallization Systems
Understand Impurity Incorporation Mechanisms to Develop an Impurity Mitigation Strategy
Image2Chords converts images to high-quality chord length distributions (CLD’s), trends and statisti...
EasyViewer in Peer-Reviewed Publications
Agrawal, S., Rawal, S. H., Reddy, V. R., & Merritt, J. M. (2024). Use of automation, dynamic image analysis, and process analytical technologies to enable data rich particle engineering efforts at the Drug Substance / Drug Product interface: A case study using Lovastatin. Process Safety and Environmental Protection/Transactions of the Institution of Chemical Engineers. Part B, Process Safety and Environmental Protection/Chemical Engineering Research and Design/Chemical Engineering Research & Design. https://doi.org/10.1016/j.cherd.2024.04.032
Li, K., Li, J., Peng, H., Liu, Y., Wei, X., Shen, R., Xu, S., Yu, C., Chen, M., Zhou, L., & Gong, J. (2024). Study on agglomeration mechanism of ammonium paratungstate pentahydrate and controllable preparation of pure monodisperse crystals. Powder Technology, 438, 119572. https://doi.org/10.1016/j.powtec.2024.119572
Wu, W., Chappelow, C., Hanspal, N., Larsen, P. A., Patton, J., Shinkle, A., & Nagy, Z. K. (2024). Digital design of an agrochemical crystallization process via Two-Dimensional Population Balance Modeling. Organic Process Research & Development. https://doi.org/10.1021/acs.oprd.3c00373
Vagenknecht, M., Soukup, J., Chen, A., & Irizarry, R. (2023). A deep learning solution for particle size analysis in low resolution inline microscopy images based on generative adversarial network. Powder Technology, 426, 118641. https://doi.org/10.1016/j.powtec.2023.118641
Lomont, J. P., Ralbovsky, N. M., Guza, C., Saha-Shah, A., Burzynski, J., Konietzko, J., Wang, S. C., McHugh, P. M., Mangion, I., & Smith, J. P. (2022). Process monitoring of polysaccharide deketalization for vaccine bioconjugation development using in situ analytical methodology. Journal of Pharmaceutical and Biomedical Analysis, 209, 114533. https://doi.org/10.1016/j.jpba.2021.114533
Wang, S., Liu, Y., Guo, S., Yan, H., Li, K., Tong, L., Li, T., Chen, M., Gao, Z., & Gong, J. (2022). Design of Single and Multicomponent Drug Spherical Particles with Improved Powder Properties in Water Instead of Organic Solvents: A Case Study of Gemfibrozil. ACS Sustainable Chemistry & Engineering, 10(37), 12411–12422. https://doi.org/10.1021/acssuschemeng.2c03982
Haer, M., Strahlendorf, K., Payne, J., Jung, R., Xiao, E., Mirabel, C., Rahman, N., Kowal, P., Gemmiti, G., Cronin, J. T., Gable, T., Park-Lee, K., Drolet-Vives, K., Balmer, M., & Kirkitadze, M. (2021). PAT solutions to monitor adsorption of Tetanus Toxoid with aluminum adjuvants. Journal of Pharmaceutical and Biomedical Analysis, 198, 114013. https://doi.org/10.1016/j.jpba.2021.114013
Salami, H., McDonald, M. A., Bommarius, A. S., Rousseau, R. W., & Grover, M. A. (2021). In Situ Imaging Combined with Deep Learning for Crystallization Process Monitoring: Application to Cephalexin Production. Organic Process Research & Development, 25(7), 1670–1679. https://doi.org/10.1021/acs.oprd.1c00136
Sato, Y., Liu, J., Kukor, A. J., Culhane, J. C., Tucker, J. L., Kucera, D. J., Cochran, B. M., & Hein, J. E. (2021). Real-Time Monitoring of Solid–Liquid Slurries: Optimized Synthesis of Tetrabenazine. The Journal of Organic Chemistry. https://doi.org/10.1021/acs.joc.1c01098
Sirota, E., Kwok, T., Varsolona, R. J., Whittaker, A., Andreani, T., Quirie, S., Margelefsky, E., & Lamberto, D. J. (2021). Crystallization Process Development for the Final Step of the Biocatalytic Synthesis of Islatravir: Comprehensive Crystal Engineering for a Low-Dose Drug. Organic Process Research & Development, 25(2), 308–317. https://doi.org/10.1021/acs.oprd.0c00520
Zhao, X., Webb, N. J., Muehlfeld, M. P., Stottlemyer, A. L., & Russell, M. W. (2021). Application of a Semiautomated Crystallizer to Study Oiling-Out and Agglomeration Events—A Case Study in Industrial Crystallization Optimization. Organic Process Research & Development, 25(3), 564–575. https://doi.org/10.1021/acs.oprd.0c00494
Request Quote or InfoGet a QuoteInstant QuoteSolution InformationRequest a Demo
I want to…
Need assistance? Our team is here to help you achieve your goals! Speak with our experts.