Let's see how the 2850SI Silica Analyzer works. The 2850SI uses the colorimetric silicomolybdate technique to measure the dissolved silica concentration in a sample stream plus phosphate concentration for applicable models. Basic flow begins by opening the sample valve to the overflow chamber, creating constant gravity pressure while draining a small sample portion. A sample from the water stream enters the analyzer's reaction chamber, which contains an LED light source and a photodetector. A zero calibration measurement is performed to compensate for sample clarity and optical changes. Next, a reagent comprising ammonium molybdate and sulfuric acid is mixed with the sample. Oxalic acid dihydrate is then added. This prevents any phosphate in the sample from affecting silica measurement. The last reagent, a potassium disulfate and amino acid solution, is added. This results in a color change in the sample that correlates with silica concentration. The absorption of the light received at the photodetector is analyzed and converted to the silica concentration measurement, which is displayed on the analyzer's transmitter. If the 2850SI model supports phosphate monitoring, a second measurement cycle is run, this time skipping the addition of oxalic acid dihydrate and therefore allowing the phosphate concentration to also be measured and displayed. To learn more about 2850SI Silica and Phosphate Analyzer, please visit www..mt.com slash 2850SI.
How the Silica and Phosphate Analyzer Works
The silica and phosphate analyzer 2850Si supports the combined online measurement capabilities of a silica and phosphate analyzer. This saves valuable time and maintenance cost with more functionality in one single instrument. The video explains how the silicomolybdate complex produces a color change that allows the silica and phosphate analyzer to measure concentrations of silica and phosphate.











