Oxygen Sensor InPro 6900iG/12/120

O2 Sensor InPro6900iG/12/120

Low Range, Gas-Phase Oxygen Sensor.The InPro 6900iG/12/120 is an amperometric gas-phase oxygen sensor that is designed for low oxygen range applications with an accuracy of 50 ppm. This sensor uses Intelligent Sensor Management (ISM) diagnostics to reduce maintenance and downtime.

Low Level Oxygen Measurement In-Line

The InPro 6900iG/12/120 is designed for processes that require high accuracy at low oxygen concentrations, such as N2 blanketing and inertization.

Very Stable Oxygen Measurement

The large surface area of the cathode electrode and the guard ring for scavenging oxygen molecules ensure stable measurements.

Real-Time Sensor Performance Monitoring

The InPro 6900iG/12/120 uses ISM technology to provide advanced diagnostics, including days until the membrane kit should be replaced.

Material No.: 52206437

Oxygen Sensor InPro 6900iG/12/120
Call for Quote
Specifications - O2 Sensor InPro6900iG/12/120
Measurement Parameter
Gas-Phase Oxygen
Measurement Technology
Amperometric Clark Electrode
Measurement Range
51 ppm - 60 V-% O2
Accuracy
≤ ± [1% +50 ppm]
Response Time
T90 ≤ 20s (nitrogen to 15 Vol-% O2 at 25 °C / 77 °F)
Primary Media/Application
Chemical Processes
Pharmaceutical/Life Science Production
ISM (Digital) or Analog
ISM (Digital)
Cable Connector
K8S
Sensor Length
120 mm
Process Connection
Pg 13.5
Connector Design
Straight
O-Ring Material
Silicone
Sensor Diameter
12 mm
Surface Roughness of Wetted Parts
N5/Ra 16 (Ra=0.4mm/16min)
Wetted Materials
316L Stainless Steel
Wetted membrane material
PTFE
Model Family
InPro6900iG
Detection limit
50 ppm
Detection limit
50 ppm
Sensor signal in air at 25 °C (77 °F)
250...500 nA
Residual signal in oxygen free media
<0.03 % of signal in ambient air
Temperature compensation
Automatic
Measuring Temp. Range
32 °F – 158 °F (0 °C – 70 °C)
Operating Pressure (Bar)
0.200 bar–9.000 bar
Operating Pressure (PSI)
2.9 to 130 psi absolute
Mechanical Temp. Range
23 °F – 250 °F (-5 °C – 121 °C)
Design pressure (bar)
maximum 12 bar
Design Pressure (PSI)
maximum 174 psi absolute
Hazardous Area Approvals
ATEX: Ex ia IIC T6 / T5 / T4 / T3 Ga / Gb, Ex ia IIIC T69 °C / T81 °C / T109 °C / T161 °C Da / Db.
FM: IS Cl. I, II, III, Div 1, GR ABCDEFG / T6 *
Hygienic/Biocompatibility Approvals
EHEDG, FDA/USP Class VI
Other certificates
METTLER TOLEDO Quality Certificate, Material certificate 3.1, N5/Ra 17
Mechanical Temperature Resistance (Celsius)
-5 °C – 121 °C
Operating Range
50 ppm - 60 V-% O2
Connection
K8S ISM
Measured Pressure Resistance
0.2 bar – 9 bar
Mechanical Temperature Resistance (Fahrenheit)
23 °F – 250 °F
KALREZ is a registered trademark of E. I. Du Pont de Nemours and Company Corporation

Accurate at Low Oxygen Concentrations

The InPro 6900iG/12/120 offers reliable measurement between 0.1% and 60% oxygen at an accuracy of 50 ppm. This makes it suitable for applications that need measurement at a low ppm level and require high operational availability.

Suited to Your Process Needs

To meet the requirements of your specific application, the InPro 6900iG/12/120 is 120 mm long for small to medium length installations. It uses a standard silicone O-ring with 316L stainless steel wetted parts.

Fast Sensor Replacement for More Uptime

The InPro 6900iG/12/120 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process.

Plan Maintenance with ISM Diagnostics

ISM technology in the InPro 6900iG/12/120 monitors sensor stress to provide a prediction for upcoming calibration needs. It also tracks electrolyte levels to identify evaporation and leakage, and informs you when refilling is required.

Accessories

Sensor Calibration & Maintenance Tools

The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.

Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.

Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.

Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.

Material No.: 52300383

Consumables

Software

Get Your Quote
O2 Sensor InPro6900iG/12/120
Hazardous Area
FM Approved