
염화 알칼리 생산용
InPro 4850i는 염소 알칼리 공정에 특화되어 설계되었습니다. 공정에서의 나트륨 농도(식염수)를 기준으로 사용합니다.
가혹한 조건을 견딜 수 있게 설계됨
해당 pH 센서에는 다이어프램이 없어 다른 pH 및 ORP 전극에서 파손을 일으키는 염소 및 기타 산화제에 영향을 받지 않습니다.
ISM이 포함된 첨단 디지털 pH 센서
InPro 4850i는 측정 방해 및 장애 요소에 영향을 받지 않는 ISM 디지털 신호로 100% 신호 무결성과 안전성을 보장합니다.
Material No.: 30536625
InPro 4850 i/120은 염소 알칼리 공정 식염수를 기준으로 사용하는 나트륨 성분에 민감한 유리 멤브레인이 특징입니다. 기준 시스템에는 연결부가 없으므로 pH 센서의 산화를 방지하고 센서의 수명을 연장할 수 있습니다.
결합형 pH 및 ORP 센서는 신호를 안정화하고 산화 환원 측정이 가능한 백금 용액 접지와 차폐 시스템을 사용합니다. 또한 디지털 신호는 100% 신호 무결성을 통해 안정적이고 정확한 측정을 제공합니다.
InPro 4850i의 ISM 예측 진단을 통해 시간 기준 유지보수에서 예측 가능한 유지 보수로 전환할 수 있습니다. 센서는 교정 및 교체가 필요한 시기를 명확하게 표시하여 예상치 못한 가동 중지 시간을 줄입니다.
InPro 4850i 염소 알칼리 pH 및 ORP 센서는 Ex 인증을 획득했으며 Ex로 분류되는 생산 시설의 위험 분류 구역에서 엄격한 공정에 사용할 수 있습니다.
ISM (Digital) or Analog | ISM (Digital) |
pH Sensing Technology | 고알칼리 (HA High Alkali) 용 Glass mebrane |
pH Range | 0 – 14 |
기준 시스템 | |
공정 온도 (섭씨) | -10 °C - 120 °C |
Cable 연결부 | K8S |
공정 연결 | Pg 13.5 Thread |
멸균 가능/오토클레이브 가능 | 아니요 |
센서 삽입길이 | 120 mm |
인증서 및 인증 | CE METTLER TOLEDO Quality Certificate FM: IS CI. I, II, III, Div 1, GR ABCDEFG / T6 ATEX/IECEx: Ex ia IIC T6/T5/T4/T3 Ga/Gb PED |
공정 압력 (Bar) | |
모델 종류 | |
온도 센서 | 디지털 |
측정 파라미터 | pH ORP/Redox |
샤프트 재질 | 유리 |
Solution Ground / Redox Metal | 백금 |
리필 가능한 전해질 | 아니요 |
방폭 지역 승인 | 예 |
기본 매체/Application | Chemical Process |
위생/생체 적합성 승인 | 아니요 |
Long Life in Chlor-Alkali Applications The InPro 4850i/120 pH probe features a sodium-sensitive glass membrane that uses the chlor-alkali process brine as a reference. The reference system has no junction, which allows the pH sensor to resist oxidization and extends the sensor's life. | |
Versatile pH and ORP Sensor This pH sensor uses a solution ground and shielding system that stabilizes the signal and enables redox measurement. Additionally, the digital signal provides 100% signal integrity for stable and accurate measurement. | |
Diagnostics to Reduce Maintenance The ISM predictive diagnostics on the InPro 4850i/120 allow the shift from time-based maintenance to predictive maintenance. The sensor provides a clear indication of when it will need calibrated, maintained and replaced to reduce unplanned downtime. | |
Compliance with Safety Regulations The InPro 4850i/120 chlor-alkali pH sensor is Ex-certified so that it can be used for demanding processes in hazardous-classified zones of your production facility. |
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Material No.: 52300383
Material No.: 30130631
pH 센서 InPro4850i/SG/120