عربي

InTrac 789 VC Model

Name: InTrac 789 VC Model
Brand: Mettler Toledo

The InTrac 789 is an affordable, retractable, housing solution for the chemical industry, providing enhanced safety, longer sensor life, and lower costs. It's compatible with METTLER TOLEDO pH sensors and allows installation without modifications.

رقم المادة: 30927880

Up to 40% cut in sensor exchange

Using an InTrac 789 housing means only the pH electrode needs periodic replacement. Therefore, replacement costs are reduced significantly.

Maximize product quality and yield

Its long insertion length enables probe use in vessels or pipes with thick insulation, leading to higher process confidence and improved yield.

Reduce metal waste vs. hot tap sensors

The InTrac 789 housing considerably reduces the quantity of metal wasted when replacing pH probes as compared with hot tap retractable sensors.

Simplified cleaning and calibration

The ability to clean and calibrate sensors within the housing eliminates the need for sensor removal during regular maintenance. This significantly simplifies handling, leading to a more efficient and effective maintenance routine.

Install at any angle, no changes needed

A broad portfolio of pH sensors compatible with the InTrac 789 allows for reliable measurement in horizontal, vertical, or upside-down positions, without needing port modifications on vessels or pipes.

Ensures process and environmental safety

The Enhanced Pressure Kit and the housing's design according to PED regulations leads to maximum process and environmental safety in high-pressure environments.

Keep your installation up and running

The METTLER TOLEDO Basic Preventative Maintenance Service offering helps minimize unplanned downtime and increases the reliability of the measurement point.

المواصفات - InTrac 789 VC Model

Measuring Temp. Range	0 °C – 130 °C
Measured Pressure Resistance	0 bar – 20 bar 0 psi – 290 psi

Retractable Housings Guide

Retractable Housings Guide

This guide provides an overview of retractable housings and the steps you should take in selecting the right housing for specific processes and indust...

Instruction Manual

Instruction Manual: InTrac 789 VC

Quick Guide: InTrac 789 Retractable Housing

Datasheet: InTrac 789 Retractable Housing

Declaration of Conformity - InTrac789 VC

M400 Process Transmitter

Transmitter M400 2XH Type2

M400 2XH Type 2 is a 1-channel, 2-wire, intrinsically-safe transmitter. It is used for analog and digital sensors, including pH/ORP, pH/pNa, conductivity 2e/4e, amp./opt. O2 and CO2 (pharma). It features PID control, 2 OC digital outputs and HART.

رقم المادة: 30655901

Transmitter M400 2XH Type3

M400 2XH Type 3 is a 1-channel, 2-wire, intrinsically-safe transmitter. It is for analog and digital pH/ORP, pH/pNa, conductivity 2e/4e, amp.O2 (gas), opt.O2 , CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.

رقم المادة: 30655905

In-Line pH Probes & Sensors

pH Sensor InPro3100i/UD/120

The InPro 3100i UD is a digital ISM pH electrode with temperature sensor, that can be installed upside-down in bioprocesses where CIP and SIP procedures are required. The 120 mm version is optimal for short installation lengths.

رقم المادة: 52005433

pH Sensor InPro4260i/SG/120

The InPro 4260i is a combined pH and ORP (redox) probe with integrated temperature sensor designed for use in highly demanding chemical applications. It provides ISM advanced diagnostics to optimize maintenance decisions and sensor lifetime.

رقم المادة: 52005381

pH Sensor InPro4850i/SG/120

The InPro 4850i/120 is a dual-membrane pH and ORP sensor for the measurement in processes with stable sodium concentration. This 120 mm probe combines accurate measurement with durability for tough environments.

رقم المادة: 30536625

الحصول على عرض الأسعار

InTrac 789 VC Model

أريد أن...