DO Sensor InPro6820/25/160
Oxygen Probe for Sterile Conditions.The InPro 6820 dissolved oxygen sensor with 25 mm diameter body provides maximum accuracy and ultimate cleanability
Sensor for Hygienic Applications
The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications.
Durable and Hygienic Design
The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination.
Easy to Integrate
The InPro 6820 DO sensor is easy to integrate into your process. Its T-82 connector helps ensure reliable measurements.
رقم المادة: 52201021
Product Family:dissolved oxygen sensors00030035
المواصفات - DO Sensor InPro6820/25/160
| Sensor Length | 160 mm |
| Mechanical Temp. Range | -5 °C – 140 °C |
| Design Pressure–: | 12 bar |
| Detection limit | 6 ppb |
| Measured Pressure Resistance | 0.2 bar – 6 bar |
| Measuring Temp. Range | 0 °C – 80 °C |
Long Membrane Life
Ingold's PTFE/silicone membranes have been designed with an internal steel mesh that makes the membrane more rugged and dramatically increases membrane life.
Modular Design Saves Time and Money
Replacement of the anode/cathode assembly has been made simple with state-of-the-art interior sensor design, thereby reducing maintenance costs. No complicated service procedures: the quick-disconnect interior body can be replaced in less than 5 minutes.
High Process Safety
The FDA compliant materials for construction and the easy-to-clean hygienically polished surface finish of N5 grade satisfy increasing regulatory requirements.
