DO Sensor InPro6810/25/260
Oxygen Probe for Sterile Conditions.The InPro 6810 dissolved oxygen sensor with 25 mm diameter body provides maximum accuracy and ultimate cleanability for vessels with limited space or in containers with smaller volumes.
Sensor for Hygienic Applications
The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications.
Durable and Hygienic Design
The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination.
Easy to Integrate
The InPro 6810 DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.
رقم المادة: 52200980
| Sensor Length | 260 mm |
| Mechanical Temp. Range | -5 °C – 140 °C |
| Design Pressure–: | 12 bar |
| Detection limit | 6 ppb |
| Measured Pressure Resistance | 0.2 bar – 6 bar |
| Measuring Temp. Range | 0 °C – 80 °C |
Long Membrane Life
Ingold's PTFE/silicone membranes have been designed with an internal steel mesh that makes the membrane more rugged and dramatically increases membrane life.
Modular Design Saves Time and Money
Replacement of the anode/cathode assembly has been made simple with state-of-the-art interior sensor design, thereby reducing maintenance costs. No complicated service procedures: the quick-disconnect interior body can be replaced in less than 5 minutes.
High Process Safety
The FDA compliant materials for construction and the easy-to-clean hygienically polished surface finish of N5 grade satisfy increasing regulatory requirements.
