DO Sensor InPro6800/12/070
Oxygen Probe for Sterile Conditions.The InPro 6800 dissolved oxygen sensor with 12 mm diameter body provides maximum accuracy and ultimate cleanability.
Sensor for Hygienic Applications
The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications.
Durable and Hygienic Design
The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination.
Easy to Integrate
The InPro 6800 DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.
رقم المادة: 52200964
Product Family:dissolved oxygen sensors00030003
المواصفات - DO Sensor InPro6800/12/070
| Sensor Length | 70 mm |
| Mechanical Temp. Range | -5 °C – 140 °C |
| Design Pressure–: | 12 bar |
| Detection limit | 6 ppb |
| Measured Pressure Resistance | 0.2 bar – 6 bar |
| Measuring Temp. Range | 0 °C – 80 °C |
Long Membrane Life
Ingold's PTFE/silicone membranes have been designed with an internal steel mesh that makes the membrane more rugged and dramatically increases membrane life.
Modular Design Saves Time and Money
Replacement of the anode/cathode assembly has been made simple with state-of-the-art interior sensor design, thereby reducing maintenance costs. No complicated service procedures: the quick-disconnect interior body can be replaced in less than 5 minutes.
High Process Safety
The FDA-compliant materials of construction and the easy-to-clean hygienically polished N5 grade surface finish satisfy regulatory requirements.
