Maximize Bioreactor Productivity
In situ measurement of CO2 with the InPro 5000i 12/120 allows immediate reaction to CO2 changes to help maximize productivity in cell culture.
Sterilizable and Autoclavable
The InPro 5000i 12/120 is fully SIP resistant and autoclavable. It is made of FDA compliant materials, making it optimal for pharmaceutical processes.
Easy to Handle and Maintain
This CO2 sensor uses a membrane body concept to dramatically limit maintenance time. The inner body, a pH electrode, can easily be replaced on site.
رقم المادة: 30013606
| Measuring Temp. Range | 0 °C – 60 °C |
| Mechanical Temp. Range | 0 °C – 135 °C |
| Sensor Length | 120 mm |
| Design Pressure–: | 3 bar |
| Operating Range CO2 | 10 mbar – 1,000 mbar |
| Measured Pressure Resistance | 0.2 bar – 2 bar |
High Performance Measurement
The InPro 5000i provides a fast response time and high signal stability when measuring CO2 in bioreactors. It is designed to help you achieve real-time process control and maximize the productivity of your cell culture/fermation.
Digital Technology with Diagnostics
This CO2 sensor uses Intelligent Sensor Management (ISM) technology. This provides pre-batch diagnostics for the best measurement performance and full traceability for complete documentation. The Plug and Measure feature supports seamless integration.
Compliant, Hygienic Design
The InPro 5000i is steam sterilizable and autoclavable, making it optimal for pharmaceutical bioreactors. It is made of FDA compliant materials and is EHEDG certified for cleanability.
Long-Lasting Construction
This CO2 sensor uses Intelligent Sensor Management (ISM) technology. This provides pre-batch diagnostics for the best measurement performance and full traceability for complete documentation. The Plug and Measure feature supports seamless integration.
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
رقم المادة: 52300383
رقم المادة: 30130631
رقم المادة: 51300193
رقم المادة: 51340059
