Material No.: 58042004
| Sodium Measurement Range | 0.01-100,000 ppb or equivalent ppm, auto-ranging |
| Sodium Measurement Accuracy | ± 10% of reading ± 0.1 ppb, typical using DIPA as reagent ± 10% of reading ± 1 ppb, typical using ammonium hydroxide as reagent |
| Response Time | 90% at 5 minutes |
| Sample pH | 2.5-12 |
| Update Rate | Once per second |
| Reagent Consumption | 3-4 L per year DIPA, or 9-12 L per year ammonium hydroxide typical more at higher temperatures and for cation exchange samples |
| Sample Flow rate | >40 mL/min (>20 mL/min for cation exchange samples), excess to drain |
| Sample Temperature | 5-50°C (41-122°F) |
| Sample Pressure | 0.3-7 bar (5-100 psig) |
| Grab Sample Measurement | Available option |
| Power Supply | 100-240 VAC, 50-60 Hz, 25 W, on power loss all settings are retained without batteries |
| Dimensions (HxWxD) | 851 x 400 x 165 mm (33.5" x 15.75" x 6.5") |
| Weight | 4.5 kg (10 lbs) |
| Ambient Operating Temperature | 5-50 °C (41-122 °F) |
| Humidity | 10-90% non-condensing |
| Ratings/Approvals | CE, UL, IP65 |
| Dimensions (HxWxD) | 851 mm x 400 mm x 165 mm |
| Process Connection | Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included Sample inlet: 6 mm or 1/4" OD tube SS compression fitting Drain hose: 19 x 25.4 mm (¾ x 1"), 2 m (6 ft) length included |
| Operator Interface | 4-line backlit LCD, 5 tactile keys simultaneous display of sodium, conditioned pH, auto-cal status (temperature optional) |
| Analog Output | 22mA alarm, 500 ohm max load, not for use with externally powered circuit For sodium, conditioned pH, temperature four powered 0/4-20 mA, |
| Power Supply (AC/DC) | 100 V – 240 V |
| Analog Output Scaling | Linear, bi-linear, logarithmic (1,2,3,4 decades), auto ranging |
| Flow Rate | 40 mL/min – 60 mL/min |
| Measurement Parameter | Sodium |
| Electrode Conditioning | Manual |
| Operating Range (Temp.) | 5 °C – 50 °C |
| Relay Contacts | 3A resistive freely assignable to setpoints for sodium, pH, temperature other relays used for auto-cal |
| Sodium Calibration | Manual 3-point known addition manual 1- or 2-point |
| Operating Range | 0.01 ppb – 100,000 ppb |
| Analog Output Accuracy | ± 0.05 mA |
| EnclosureType | Full |
| Outputs | 4 Analog |
| Built-in sequencer | No |
