The EasyClean 500 is used for fully automatic cleaning and calibration of pH, ORP or oxygen measurement points. It provides a flexible system solution that can be utilized for continuous or periodic measurement.
Please describe your project. /content/ca/en/home/products/Process-Analytics/sensor-cleaning-housing/sensor-cleaning/easy-clean-500.fb.1.c.11.html
Analytical Sensor Cleaning and Calibration Systems EasyClean 500
Why do manual sensor maintenance if you don't have to? The EasyClean 500 is a compact sensor cleaning and calibration system for fully automated routine maintenance of pH sensors. Six standard programs and two customizable programs ensure operators can configure the system to their exact needs
Highlights
Up to 80% Lower Maintenance
The only technician intervention on an EasyClean 500 system is periodic refilling of cleaning and buffer solutions, plus occasional sensor exchanges.
Reliable Process Control
Automated sensor maintenance with the EasyClean 500 and ISM's predictive diagnostics ensure reliable measurements and process consistency.
Keeps Employees Safe
Automated maintenance limits personnel's exposure to health-hazardous environments, helping to keep them safe.
For High-Maintenance Measurement Points
Some maintenance-intensive measurement points in harsh process conditions are too expensive to operate. The EasyClean 500 cleans the sensors automatically as often as required, making such measurement points economically viable.
Leverage the Power of ISM
The system leverages the Intelligent Sensor Management (ISM) platform, including error-free plug-and-measure sensor installation, automatically triggering of calibration whenever it is required, and precise data on when the sensor will need replaced.
Expert Servicing
Installation and regular system maintenance by METTLER TOLEDO Service experts help ensure the EasyClean 500 is always running exactly as it should - without disruption.
Specifications
Product Family:sensor cleaning and calibration systems006010003002
Specifications - Cleaning System EasyClean 500
Operating pressure for retractable housing
0.4 - 0.8 MPa (4 - 8 bar 58 - 116 psi)
Protection Rating
IP 65
Rinsing
Yes
Cleaning
Yes
Calibration
Yes
Compressed Air Supply
0.4 - 1 MPa (4 - 10 bar 58 - 145 psi)
Parameter(s)
pH / ORP/ DO
Ambient Temperature
2 °C – 55 °C 35.6 °F – 131 °F
Power Supply
15V - 30 V/100mA
Model Family
EasyClean 500
Pressurized Water
0.2 - 0.6 MPa (2 - 6 bar 29 - 87 psi)
Approvals and Certificates
CE compliant
Enclosure Material
316L Stainless steel
Cleaning:YesCleaning:YesCalibration:YesCalibration:YesCompressed Air Supply:0.4 - 1 MPa (4 - 10 bar; 58 - 145 psi)Compressed Air Supply:0.4 - 1 MPa (4 - 10 bar; 58 - 145 psi)Approvals and Certificates:CE compliantApprovals and Certificates:CE compliant
EasyClean 500(X) is a compact cleaning and calibration system for fully automated routine maintenance of process analytical sensors. The EasyClean 500...
The making of the EasyClean 500(X) uses the best technology and obeys all the safety regulations in force. The EasyClean 500(X) is a controller for fu...
M400 2H Type 2 is a 1-channel, 2-wire, low power transmitter. It is compatible with analog and digital sensors, including pH/ORP, pH/pNa, conductivity 2e/4e, amp. O2, opt. O2 and CO2 (pharma). It features PID control, 2 OC digital outputs and HART.
M400 2XH Type 2 is a 1-channel, 2-wire, intrinsically-safe transmitter. It is used for analog and digital sensors, including pH/ORP, pH/pNa, conductivity 2e/4e, amp./opt. O2 and CO2 (pharma). It features PID control, 2 OC digital outputs and HART.
M400 2XH Type 2 ISM is a 1-channel, 2-wire, intrinsically-safe transmitter. It is compatible with digital pH/ORP, pH/pNa, conductivity 4e, amp. O2, opt. O2 and CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
M400 2H Type 2 ISM is a 1-channel, 2-wire, low power transmitter. It is compatible with digital pH/ORP, pH/pNa, conductivity 4e, amp. O2, opt. O2 and CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
M400 2XH Type 3 is a 1-channel, 2-wire, intrinsically-safe transmitter. It is for analog and digital pH/ORP, pH/pNa, conductivity 2e/4e, amp.O2 (gas), opt.O2 , CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
M400 2XH Type 3 ISM is a 1-channel, 2-wire, intrinsically-safe transmitter. It is compatible with digital pH/ORP, pH/pNa, conductivity 2e/4e, amp.O2 (gas), opt.O2 and CO2 (pharma) sensors. It features PID control, 2 OC digital outputs and HART.
Material No.: 30655908
Please describe your project.
Consumables
Buffers for In-Line pH Sensors
Buffer pH 4.01 ACS red 5000ml
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 4.01 buffer solution.
Material No.: 51319012
Please describe your project.
Buffer pH 7.00 ACS green 5000ml
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 7.00 buffer solution.
Material No.: 51319016
Please describe your project.
Buffer pH 9.21 ACS blue 5000ml
Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 9.21 buffer solution.
Material No.: 51319017
Please describe your project.
Software
More Information
Get Your Quote
Cleaning System EasyClean 500
Please describe your project.
Request Quote or InfoGet a QuoteInstant QuoteSolution InformationRequest a Demo
I want to…
Need assistance? Our team is here to achieve your goals! Speak with our experts.
