Cond Sensor 3/4NPT 0.1C Ti/SS 30FT - Discontinued Product
Discontinued since: Sep, 2021
Material No.: 58031220
Services- Cond Sensor 3/4NPT 0.1C Ti/SS 30FT
Explore our Services - Tailored to Fit your needs
We support and service your instruments through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
Uptime. Support & Repair
Highlights
Two-Electrode Conductivity Sensor
Used with M300, 200CR or 2000 transmitters for highest accuracy conductivity and resistivity measurements.
Chemically resistant materials
Optimum response and chemical resistance with titanium electrodes, Teflon-coated stainless steel fitting and PEEK insulator.
Traceable Calibration
Maximum accuracy assured with individually calibrated and certified cell constant and temperature sensor traceable to ASTM and NIST.
Specifications
Specifications - Cond Sensor 3/4NPT 0.1C Ti/SS 30FT
| Operating Range (µS/cm) | 0.02 – 2,000 |
| Temperature Sensor | PT 1000 |
| Cell Constant | 0.1 cm-1 |
| Connection | ¾ inchNPT |
| Cable | 30 ft (9 m) |
| Connector | Standard |
| Measurement Technology | Conductive |
| Fitting material | PTFE/SS |
| Insertion length | 34mm |
| Model Family | Analog |
| Hazardous Area Approvals | No |
| Measured Pressure Resistance | 250 psig @ 200 °F (17 bar @ 93 °C) |
| Electrode Material | Titanium |
| Primary Media/Application | Other Industrial Processes Other Water Processes Power Plant Water/Steam Semiconductor Water |
| Hygienic/Biocompatibility Approvals | No |
| Process fitting | ¾" NPTM |
| Cell Constant (accuracy) | ± 1% |
| Electrode Configuration | 2-electrode |
| Measurement Range | 0.02 - 2,000 µS/cm |
| Sensor Material | PTFE/SS |
Documentation
Brochures
The new edition of our Power Industry brochure addresses all areas of power plants where precise water analytics are needed. Get an overview of METTLE...