Artikelnummer: 52206438
Meetparameter | Gasvormige zuurstof |
Meettechnologie | Amperometrische zuurstofelektrode |
Meetbereik | 50 ppm - 60 V-% O2 |
Nauwkeurigheid | ≤ ± [1% +50 ppm] |
Responstijd | T90 ≤ 20 s (stikstof tot 15 Vol-% O2 bij 25 °C / 77 °F) |
Primaire media/toepassing | Chemische processen Farmaceutische/biowetenschappelijke productie |
ISM (digitaal) of analoog | ISM (digitaal) |
Kabelconnector | K8S |
Sensorlengte | 220 mm |
Procesverbinding | Pg 13,5 |
Ontwerp van de connector | Recht |
Materiaal Oringen | Silicone |
Sensordiameter | 12 mm |
Oppervlakteruwheid van natte delen | N5/Ra 16 (Ra=0,4 mm/16 min) |
Natte materialen | |
Bevochtigd membraanmateriaal | PTFE |
Modelfamilie | InPro6900iG |
Detectielimiet | 50 ppm |
Detectielimiet | 50 ppm |
Sensorsignaal in lucht bij 25 °C (77 °F) | 250...500 nA |
Restsignaal in zuurstofvrije media | <0,03% van signaal in omgevingslucht |
Temperatuurcompensatie | Automatisch |
Temperatuur meetbereik | 0 °C – 70 °C |
Bedrijfsdruk (bar) | 0,200 bar-9,000 bar |
Mechanische temp. Bereik | -5 °C – 121 °C |
Ontwerpdruk (bar) | maximaal 12 bar |
Ontwerpdruk (psi) | maximaal 174 psi absoluut |
Goedkeuring voor explosiegevaarlijke ruimtes | ATEX: Ex ia IIC T6 / T5 / T4 / T3 Ga / Gb, Ex ia IIIC T69 °C / T81 °C / T109 °C / T161 °C Da / Db. FM: IS Cl. I, II, III, Div 1, GR ABCDEFG / T6 * |
Goedkeuringen voor hygiënische toepassingen/biocompatibiliteit | EHEDG, FDA/USP Klasse VI |
Andere certificaten | Kwaliteitscertificaat van METTLER TOLEDO, Materiaalcertificaat 3.1, N5/Ra 16 |
-5 °C – 121 °C | |
工作范围 | 50 ppm - 60 V-% O2 |
Aansluiten | K8S ISM |
Gemeten drukweerstand | 0,2 bar – 9 bar |
23 °F – 250 °F |
Accurate at Low Oxygen Concentrations The InPro 6900iG/12/220 offers reliable measurement between 0.1% and 60% oxygen, at an accuracy of 50 ppm. This makes it suitable for applications that need measurement at a low ppm level and require high operational availability. |
Suited to Your Process Needs To meet the requirements of your specific application, the InPro 6900iG/12/220 is 220 mm long for medium to long length installations. It uses a standard silicone O-ring with 316L stainless steel wetted parts. |
Fast Sensor Replacement for More Uptime The InPro 6900iG/12/220 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process. |
Plan Maintenance with ISM Diagnostics ISM technology in the InPro 6900iG/12/220 monitors sensor stress to provide a prediction for upcoming calibration needs. It also tracks electrolyte level to identify evaporation and leakage, and informs you when refilling is required. |
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Artikelnummer: 52300383