| Thermostat | |
| Heating | Electrical |
| Cooling | Peltier |
| Cooling Performance | 0°C 35 W
20°C 65 W
40°C 95 W |
| Temperature Range | -40°C to 180°C (jacket temperature) |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization |
| Stirring | 30 rpm to 1200 rpm |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA |
| Operation | iControl software for calorimetric applications
Graphical touchscreen and/or iControl Software | |
| | |
| Reactors | |
| Type | Single piece or two piece (with bottom drain valve)
|
| Volume | 1000 mL |
| Pressure | 50 mbar to 1 bar |
| Material | Duran® glass |
| Stirrer | Pitch-blade (glass, Alloy 22)
Anchor (glass, Alloy 22)
Half-moon (PTFE for single piece reactor) |
| | |
| Calorimetry | |
| Type | Heat Flow |
| Calibration Heater | Max. 20 W |
| Precision Heat Transfer | Typically ± 3% |
| Accuracy and Precision Specific Heat | Typically ± 10% |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions
Typically ± 5% to 10%, under non-isothermal conditions
|
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions.
Peak-to-peak noise is ≤ approximately 0.4 W. |
| | |
| HFCal Module | |
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax,
no additional power supply or PC connection required |
| Data Logging | Via iControl Software |
| Dimensions | 120 mm x 40 mm x 170 mm |
| | |
| Software | iControl 5.2 or higher required, HFCal license |
