M700(X) Modular and Adaptive Transmitter - Niet meer leverbaar

Niet meer leverbaar sinds: Dec, 2020

For adaptable multi-parameter process control

The M700 is a flexible measuring system for continuous measurements in the field of liquid analysis. The M700X is intended for operation in locations subject to explosion hazards which require equipment of Group II, device category 2(1), gas/dust. Thanks to its modular design, the M700 can easily be adapted to your measuring task. Flexible use of plug-in modules allows combined measurements as well as later expansions or modifications. The measured variables depend on the measuring modules installed.

Specificaties

Specificaties - M700(X) Modular and Adaptive Transmitter

Stroomvoorziening 24...230 V AC
Protection IP65
Current Output 2 outputs
Relays 4 relay contacts
Sensor inputs pH / O2 / Cond / Cond Ind
ISM yes
Communication PROFIBUS®-PA / Foundation Fieldbus
Functies modular system
Mounting options wall, panel or pipe
Korte beschrijving "Premium Line" - Simultaneous Measurement of pH, DO and Cond
Description
The freely selectable software functions (extended logbook, FDA 21 CFR Part 11 compliance support, ServiceScope etc.) increase safety, performance and diagnostics. Communication modules are available for further processing of the output signals.

The rugged enclosure (IP 65) can be wall or pipe mounted or fixed into a control panel. The M700 version with hygienic, polished stainless steel enclosure allows application in the field of biotechnology, food processing, and in the pharmaceutical industry. The M700 version with coated steel enclosure - extremely corrosion resistant - has been developed for application in the chemical industry, environmental engineering, water and wastewater treatment, and for application in power plants.

Features and Benefits
Cost savings through modularity
  • The modular concept allows integration of up to three modules into one basic instrument. Double channel measurement reduces total costs per measuring loop typical for fermentation processes (pH/DO) or redundant measurement in chemical processes (pH/pH).
 
Wide communication possibilities
  • The M700 has no communication limitations. Modules for PROFIBUS®-PA / Foundation Fieldbus and extended output modules fully integrate the M700 into all control systems.
 
Application oriented
  • Enclosure designs are available for all application areas / environments, e.g. for hazardous areas and hygienic environments.

      

Documentatie

Casestudy's

Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters

Applicaties

Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Minimizing Inerting System Maintenance
This white paper explains how TDL O₂ sensor can minimize inerting system maintenance & how to integrate them into a DCS system for fully automated oxy...
Minimizing Inerting System Maintenance
This white paper explains how TDL O₂ sensor can minimize inerting system maintenance & how to integrate them into a DCS system for fully automated oxy...

Bijbehorende producten en oplossingen

Reinigingssysteem EasyClean 400-NCC2
EasyClean400 wordt gebruikt voor volledig automatische reiniging en kalibratie van pH-meetpunten. Het biedt een flexibele systeemoplossing die kan wor...
Cleaning System EasyClean 200e
Betrouwbaar spoelen en reinigen van sensoren voor sterk verontreinigde processen
Reinigingssysteem EasyClean 150
EasyClean150 is ontworpen voor het automatisch spoelen van sensoren die in een pneumatisch aangedreven intrekbare behuizing zijn geïnstalleerd. Het sy...

Support Software

Profibus® PA - Device Description Files (DD)
This site contains the General Station Description (GSD) file and the Device Description (DD) files for the Siemens Simatic PDM tool of all METTLER TO...
ProTrim - Update Software for the M 700 Transmitter
ProTrim is an update software for the M 700 transmitter to facilitate the update of your M 700 system from version 4.x/5.x to version 6.0. It is a con...

Accessoires

Verbruiksartikelen

Software

More Information

Ik wil...
Hulp nodig?
Wij willen u helpen bij het bereiken van uw doelen. Praat met onze experts.