Copper crucibles – for OIT measurements
copper crucible

Copper Crucibles for Thermal Analysis

For the catalytic acceleration of oxidations

 

Copper Crucible

Crucibles for Thermal Analysis

Crucibles serve as containers for samples during thermoanalytical measurements. They guarantee tha...

Crucibles for Thermal Analysis

Crucibles serve as containers for samples during thermoanalytical measurements. They guarantee that the sensor is not contaminated by the measurement. The type of crucible used for a measurement can have a large effect on the quality of the results obtained, and in addition, also influences important characteristics of the DSC measuring cell. Considering the relevant factors before the measurement can often help to save time later on when interpreting the curve.

Features and benefits:

  • Large volume – increases the sensitivity
  • Low mass – pushes the resolution to the limit
  • Purity – no interaction of the sample with the crucible
  • Material – guarantees high thermal conductivity and form stability
  • Flatness – ensures perfect thermal contact and no artifacts

 

Choosing the right crucible guarantees the best results

The following criteria have a significant influence for selecting the right crucible:

  • TGA or DSC analysis
  • Temperature range
  • Sample
  • Sample changer
  • Atmosphere
  • crucible mass
  • crucible volume

Extremely Wide Crucible Range


 
copper crucible
copper crucible
copper crucible

Products and Specs

 
Products and Specs
 
{searchattributeslabels/Search CapacityLabel}
Quantity
Volume μL
Pin
Lid
Cu crucible
{searchattributeslabels/Search CapacityLabel}
Quantity 100
Volume μL 40
Pin without
Lid without
Material No.: 51140407
Quantity100
Volume μL40
Pinwithout
Lidwithout
Sealing tool
Suitable forDSC/TGA/sample robot
Comparison

Documentation

Brochures

STARe Excellence Software Brochure
Thermal analysis is a well-established analytical method that is widely used in many different fields. It provides laboratories with valuable results...
Crucibles for Thermal Analysis Brochure
Crucibles serve as containers for samples during thermoanalytical measurements. They guarantee that the sensor is not contaminated by the measurement....

Datasheets

The MultiSTAR® DSC Sensor Family Datasheet
The sensor is the heart of any DSC measuring cell. Ideally a modern DSC sensor should be very sensitive, have a fast response, a baseline that is abso...
DSC-Chemiluminescence System Datasheet
The high-pressure DSC-CL combination has the potential to replace the traditional timeconsuming oven aging tests in the prescreening phase of novel po...
DSC-Microscopy System Datasheet
The system provides images of samples at predefined temperature or time intervals. A further evaluation possibility is to quantify color differences b...
DSC-Photocalorimetry System Datasheet
The photocalorimeter accessory is used in combination with the METTLER TOLEDO DSC 1 or DSC82xe and extends the application possibilities of DSC into t...

Services

1300 659 761
Call Service

Explore our Services - Tailored to Fit your Equipment

We support and service your measurement equipment through its entire lifecycle, from installation to preventive maintenance and calibration to equipment repair.

Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.